You can remove the screen frame usually by lifting up on it and
pulling out the bottom, it should have some plastic anti-rattle clips
on it, couple on top and bottom. Go to the hardware store and buy
some new screen material, and the round piping that goes around the
frame and holds the screen in, you'll have to determine what size
piping you need by the width of the slot in the frame, and you might
want to get the installation tool also, just a few bucks, its a
handle with a couple rollers on it. Lay the screen material over the
frame and start in one corner and start pushing the piping into the
groove as you work your way around the frame, keeping it snug and
wrinkle free. After you get it done use a razor blade and carefully
trim the extra screen material off and your done. Good luck, its
fairly easy and also cheap for the materials.


To unsubscribe from this group, send an email to:
toyota-campers-unsubscribe@...



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

_________________________________________________
IncrediMail - Email has finally evolved -