开云体育

New FW release

Version V1.4189

For ZS405 (original tinySA Ultra) and ZS406

?

Changes:

- Bug solved: TinySA-App can not control tinySA

- Improved level correction table for ZS406

?

WARNING: This FW update will do a clear config and can not load previously saved configurations and settings

--

Designer of the tinySA
For more info go to

hi Erik,
It is working again, hartelijk dank
73, PA0MIK

Hi Erik

The 189 alows running (sweep) again...

The screen capture with refresh is a bit cranky...

Thanks a lot for the fast reaction!!

Hi Erik
I have a tinySA-ULTRRA ZS-406
Version: tinySA4_v1.4-187-gc385f30
Build Time: Nov 25 2024 - 12:14:35

I have been having problems using it with the TinySA-App v1.1.20.1 running under Windows 10 Pro Version 22H2 (OS Build 19045.5247).? Basically, I can use the "Capture tinySA screen image" button at the top and turn on the Auto Refresh and the screen mimics that of the tinySA-ULTRA.?? I can also click the right of the display to bring up the menu and go through and change stuff.

?

The problem is with the main screen graph.? When I try and use the Single Span button, it sends the scan to the app from the USB comms:
50.601 tx: sweep start 145000000
50.642 rx: ch> ch>?
50.655 tx: sweep stop 146000000
50.689 tx: scanraw 145000000 146000000 1000
....
I then see:
52.753 rx: {x[ffffffd0][07]x`[07]x[ffffffa0][07]x[.... etc.
but this fails with:
07.760 rx link timeout .. disconnecting

I managed to get a trace showing on that screen once, out of all the times I have tried it, but not sure why it worked that time and never again?

Is this the "TinySA-App can not control tinySA" problem, or something else?

Your post talks of new firmware release: "Version V1.4189" (presumably "tinySA4_v1.4-189-gc....), but I don't know where do download that from??? When I look at the latest version there appears to be "tinySA_v1.4-175-g1419a93.dfu".

Sorry if I am missing something obvious?

Thanks, Richard.

?

Hey @Hugen,

Thanks for trying to help by giving that link, but it is actually HTTP (not HTTPS) and I already put the link in my post, but the latest DFU file is not there.? I even looked in the "beta" sub-directory, but that just has old stuff from 2021.

?

Hi Hugen...

?

Well, I feel a right twit now (embarrassed smile).? I had been going to the wrong directory, the /tinySA/DFU one, where I should have been going to the /tinySA4/DFU one (!).? My excuse is that I have been "burning the midnight oil" and found the directory by following the link in the "where_is_the _DFU_file.txt", instead of looking at the Firmware info in the wiki.

Anyway, it is all good.

I have updated the firmware to:
Version: tinySA4_v1.4-192-g73fe677
Build Time: Dec 23 2024 - 13:25:46

... and now the display in the TinySA-App v1.1.20.1 appears to be working fine.

?

I should get some sleep, I think...

you are not looking in the same directory that Hugen posted, you are in the tinysa2, the old one.