I used TinySA yesterday and self-calibrated it. All test were okay except one (I think it was #7 or #8) Today, I was watching the Erik Kaashoek You-Tube video called "tinySA Config and Expert Config Menu".? The first demo on the video was setting the Touch CAL. When I selected "Touch CAL" nothing happened, I clicked it a few times more and it the top-left hand calibration box came up.? I clicked that, but the second bottom-right hand box did not appear. So, I went back to the main menu, but now I could not bring it up by touching the right side of the screen. I found out, after repeated touches to the left top of the display, that I could bring up the main menu, but now when I selected any item on the menu, the entire menu disappeared.

Now, I have no menu control at all. Has anyone experienced difficulty calibrating the display?? Is there any fix for this, or should I send it back?? As far as I can tell the $100+ tinySA purchased from Amazon.com is not a knockoff. All the pictures on the tinySA website check out, as well as the serial number.

Thanks for any assistance.

Doug

You can restart the touch calibration using the jog button

开云体育

On Wed, Feb 3, 2021 at 12:23 PM, salgoud395 wrote:

... but as soon as I try to select something the menu goes away

Doug,
? ?Are you trying to select by depressing the jog switch or using a stylus?? If its with the jog switch, then I'm not sure why the menu goes away unless your firmware is corrupted and needs to be reloaded.

? If you are trying to select using a stylus, then after you bring up the menu by depressing the jog switch, you need to navigate to the CONFIG menu using the jog switch (left or right as appropriate).? When you have navigated to the CONFIG menu depress the jog switch to select it and then navigate to the TOUCH menu and select it by depressing the jog switch.? Now you should be able to perform a touchscreen calibration using your stylus.

- Herb

- Herb

开云体育

On Wed, Feb 3, 2021 at 01:38 PM, salgoud395 wrote:

I did not understand that one can bring up the by menu pressing the Jog Switch down and then use it to navigate to “Touch”>> “Touch CAL”.

See this video :?https://www.youtube.com/watch?v=LghlQ_aWjAs
?
--

On Wed, Feb 3, 2021 at 01:38 PM, salgoud395 wrote:

? I did not understand that one can bring up the by menu pressing the Jog Switch down and then use it to navigate to “Touch”>> “Touch CAL”.?

I've added this to the FAQ in the wiki

?
--