开云体育

Watch the video -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

Thanks Eric.? Connecting the HIGH and LOW ports enabled all self-tests to pass.? Now I am supposed to do a LOW level calibration.? Do I leave the HIGH and LOW ports connected via cable for this

Yes, I would agree on going for the refund, but if one was left with an unuseable carcass, it seems a pity to confine it to the Universal Storage System. I suppose the battery and screen might be

Please read at least this page?https://tinysa.org/wiki/pmwiki.php?n=Main.FirstUse -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

I know I need the read the manual, but with this talk of clones I wanted to do a quick check on my TinySA.? I tried running Self-Test from the menu but got some errors, with the errors suggesting I

Steve, Erik spent a lot of time engineering the BPF and that knowledge cannot be copied as easily as cloning a PCB.? The tinySA hardware is not open source so I would think any cloner would have a

Yes, If these clones are originating from a single source then: 1. The back of the unit will not have a white sticker with a serial number. 2. "Tiny Spertrum Analyzer" on the back will have "Spectrum"

I hate to say this, but you may have a bad clone. I have ran the self test on my two SA's after updating the firmware and they both passed all tests. The other thing could be a bad solder connection

I hate to say this, but you may have a bad clone. I have ran the self test on my two SA's after updating the firmware and they both passed all tests. The other thing could be a bad solder connection

What exactly is it that is failing, as all clones seem to have the same screenshot which should be a bandpass but looks like a flat response with a kink in it. Are the 400mhz saw filters

I know that Eric has already ID this as a clone. Can you take a photo of the back of the unit. This will also help others IDing clones. I think Eric said that clones do not have S/N on the back of the

One more here

I am amazed to see how good this is working for the price. The PC software is also working great. Thank you Erik!

This is normal The stairs come from the stepwise increase of internal amplifications of the auto AGC algorithm If you want to measure very weak signals below 1MHz I suggest to set the AGC to on? (not

Yes, its a clone Suggest you ask for a refund ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

Hi2all. My TinySA Fail at first on Test 7. I also look at the BFS in the Expert Menue. Is it an Hardwaredefekt? Does anyone have any advice on why? Michael.

Just received one TinySA from R&L and testing the unit, updated firmware and calibrated. I have a question - I see an increased noise floor at 1Mhz and below on the LOW input, it does look the same

I have the same Errors. Sorry, i thing you have a clone just like me.

The tinySA app is not ready for high mode -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

So I have been experimenting with the TinySA, got it for christmas, yes I know not suppose to open till 25th, wife let me.?? So using it on the low input with the app software it works just fine, I