开云体育

I have compared the TinySA to a Doble PDS100 partial discharge spectrum analyzer and the results? will give this 20,000 dollar instrument a run for its money. For those wanting to use the Tiny for

Steve, I'm sure you exaggerate about relearning the menu structure "every" time.? The addition of the Trace menu would be the first major restructuring of the tinySA menu in quite a while by Erik and

A minor (not important) bug on this new FW: After performing a SELFTEST and touching the screen to continue, the TRACE 2 (green line) still enabled and freezed at -25dBm. Performing individual

Dear All, As a long retired (medical) doctor, may I make a request on behalf of those who are not current or past professional electronic engineers, that the use of TinySa does not go down the road

On Sun, Aug 8, 2021 at 05:58 PM, Erik Kaashoek wrote:

On Sun, Aug 8, 2021 at 05:58 PM, Erik Kaashoek wrote: > > Herb. Each trace should have its own table avoiding the complication of > linking tables with traces. > > Technically it is the only option

Herb. Each trace should have its own table avoiding the complication of linking tables with traces. Technically it is the only option use the traces for display lines. Otherwise the code will not fit.

Erik, My opinions: Since the table values are applied to one of the 3 measurement traces then I think moving the TABLE (REFERENCE TRACE) menu option to the TRACE menu makes good sense and would be

How about adding under TRACE/CALC a TABLE option. Once CALC/TABLE is selected it is possible to edit the trace table (which effectively is what used to be called the REFERENCE table) Each trace can be

On Sat, Aug 7, 2021 at 10:35 AM, Erik Kaashoek wrote: Would it be better to have in the TRACE menu an option where you set the source of the trace to be either reference 1 or reference 2? Under

Herb, Valuable input. Would it be better to have in the TRACE menu an option where you set the source of the trace to be either reference 1 or reference 2? Under DISPLAY still can reference points

Erik, An additional noticeable change is in the DISPLAY menu.? Some menu options have been moved to the new TRACE Menu and others have been relocated or renamed within the DISPLAY menu. Users of the

Hello Erik, I have adopted my tinySA menu map. As a text file for easier editing. 73, Rudi DL5FA File: ReadMe_tinySA_menu_V1.3-313beta.txt? 2021-08-05? DL5FA Home of tinySA firmware files:

Great! I am happy with the 40 mm hinges and 30 mm screws for now. I already printed a second case in Red for the NanoVNA. I will tell the NanoVNA group about these cases too. Look what a beautiful

Erik, You do it via Wiener deconvolution. I'll put together an example and an explanation. I've never done a decon in the frequency domain using what is traditionally a time domain operation. So it

OK - Here are the links for the two cases on Thingiverse: Original Case: https://www.thingiverse.com/thing:4916912 tinySA-only Case: https://www.thingiverse.com/thing:4925280 The tinySA-only version

Glad it worked for you! Also, I need to correct a statement I made earlier about adjusting the hinge knuckle lengths for the tinySA-only version.? I stated that you could remove 2.5mm of length from

I downloaded it and will try it out. Zack W9SZ

I stuck with version 1 (the "vintage" version, lol), and it is perfect. A bit of fun getting the washers into place, but otherwise, a flawless design, print, and build. Thanks again!

I'm looking for some beta testers for a major FW upgrade. The biggest change is the addition of the TRACE menu allowing much more flexibility in the usage of the 3 traces. Also the MODIFY MARKER menu