开云体育

On Thu, Aug 5, 2021 at 09:54 AM, Erik Kaashoek wrote:

I'm looking for some beta testers for a major FW upgrade.

Hello Erik,
I have adopted my tinySA menu map.
As a text file for easier editing.
73, Rudi DL5FA

File: ReadMe_tinySA_menu_V1.3-313beta.txt? 2021-08-05? DL5FA

Home of tinySA firmware files:
??? http://athome.kaashoek.com/tinySA/DFU/beta/
Flash tinySA when in DFU mode.
$ dfu-util -a 0 -D tinySA_v1.3-313-g86fc401.dfu


Menu tree:
Legend: ? select ON/OFF
??????? ?A Select: Auto/ON/OFF

● PRESET
??? ○ LOAD STARTUP
??? ○ EMPTY 1 (or frequency span)
??? ○ EMPTY 2
??? ○ EMPTY 3
??? ○ EMPTY 4
??? ○ STORE
??????? STORE AS STARTUP
??????? STORE 1
??????? STORE 2
??????? STORE 3
??????? STORE 4
??????? FACTORY DEFAULTS

● FREQUENCY
??? ○ START
??? ○ STOP
??? ○ CENTER
??? ○ SPAN
??? ○ ZERO SPAN
??? ○ JOG STEP AUTO
??? ○ RBW? # if the RBW is reduced the span must be reduced.
??????? Auto (default)
??????? 3kHz
??????? 10kHz
??????? 30kHz
??????? 100kHz
??????? 300kHz
??????? 600kHz
??? ○ SHIFT FREQ

● LEVEL
??? ○ REF LEVEL
??????? AUTO (default)
??????? MANUAL
??? ○ SCALE/DIV
??? ○ ATTENUATE
??????? Auto (default)
??????? Manual
??? ○ UNIT
??????? dBm
??????? dBmV
??????? dBm?V
??????? Volt
??????? Watt
??? ○ EXTERNAL GAIN
??? ○ TRIGGER
??????? AUTO
??????? NORMAL (default)
??????? SINGLE
??????? TRIGGER LEVEL
??????? UP EDGE (default)
??????? DOWN EDGE
??????? MID TRIGGER
??? ? LISTEN

● TRACE
??? ○ TRACE 1,2,3 (yellow,green,red)
??? ○ ? ENABLE (default ON)
??? ○ ? FREEZE
??? ○ ? CALC OFF
??????? ○ CALC OFF (or Tap on battery symbol)
???????????? o OFF (default)
???????????? o MIN HOLD
???????????? o MAX HOLD
???????????? o MAX DECAY
???????????? o AVER 4
???????????? o AVER 16
???????????? o QUASI PEAK
??? ○ ? NORMALIZE
??? ○ ? SUBTRACT OFF
??????? o SUBTRACT OFF (default)
??????? o SUBTRACT TRACE 1
??????? o SUBTRACT TRACE 2
??????? o SUBTRACT TRACE 3
??? ○ ? COPY-?TRACE
??????? o ->TRACE 1
??????? o ->TRACE 2
??????? o ->TRACE 3

● DISPLAY
??? ? PAUSE SWEEP
??? ? WATER FALL
??? ? REFERENCE TRACE
??????? o REFERENCE 1
??????????? ? REFERENCE 1 (default)
??????????? ? REFERENCE 2
??????? o OFF
??????? ? 0Hz 0dBm (repeat 5 times)
??????????? FREQUENCY
??????????? LEVEL
??????????? DISABLE
??? ○ SWEEP TIME
??????? 0..600s, 0=disable
??? ?A SWEEP POINTS
?????????? ? 51 point
?????????? ? 101 point
?????????? ? 145 point
?????????? ? 290 point (default)
??? ○ SWEEP ACCURACY
??????? NORMAL (default)
??????? PRECISE
??????? FAST
??????? ?A FAST SPEEDUP
??????????? 2..29, 0=disable

● MARKER
??? ○ MODIFY MARKERS
??????? ■ MARKER 1
??????????? ? DELTA 1
??????????? ? NOISE
??????????? ? TRACKING (default)
??????????? TRACE 1
??????????????? o TRACE 1
??????????????? o TRACE 2
??????????????? o TRACE 3
??????????? ? TRACE AVERAGE
??????????? ■ SEARCH
??????????????? PEEK SEARCH
??????????????? MIN < LEFT
??????????????? MIN > RIGHT
??????????????? MAX < LEFT
??????????????? MAX > RIGHT
??????????????? ENTER FREQUENCY
??????????????? ? TRACKING (default)
??????????? DELETE
??????? ■ MARKER 2 same as above
??????? ■ MARKER 3 same as above
??????? ■ MARKER 4 same as above
??? ○ MARKER OPS
??????? START
??????? STOP
??????? CENTER
??????? SPAN
??????? REF LEVEL
??? ○ SEARCH MARKER
??????? PEAK SEARCH
??????? MIN < LEFT
??????? MIN > RIGHT
??????? MAX < LEFT
??????? MAX > RIGHT
??????? ENTER FREQUENCY
??????? ? TRACKING
??? RESET MARKERS

● MEASURE
??? ? OFF (default)
??? ? HARMONIC
??? ? OIP3
??? ? PHASE NOISE
??? ? SNR
??? ? -3dB WIDTH
??? ○ MORE
??????? ? AM
??????? ? FM
??????? ? THD
??????? ? CHANNEL POWER
??????? ? LINEAR

● CONFIG
??? TOUCH
??? SELF TEST? # OK
??? LEVEL CAL
??? VERSION
??? ? SPUR REMOVAL
??? ○ EXPERT CONFIG
??????? ? LOW OUTPUT
??????? LEVEL CORRECTION
??????? ?A IF FREQ
??????? ■ SCAN SPEED
??????????? ? SAMPLE DELAY
??????????? ? OFFSET DELAY
??????? SAMPLE REPEAT
??????? ■ MIXER DRIVE
??????????? +16dBm
??????????? +12dBm
??????????? +9dBm
??????????? +6dBm
??????? ■ MORE
??????????? ?A AGC
??????????? ?A LNA
??????????? ? BPF
??????????? ?A BELOW IF
??????????? DECAY
??????????? ATTACK
??????????? ○ MORE
??????????????? CORRECT FREQUENCY
??????????????? MINIMUM GRIDLINES
??????????????? CLEAR CONFIG password 1234
??????????????? ? PULSE HIGH (for external trigger)
??????????????? ■ CONNECTION
??????????????????? USB (default)
??????????????????? SERIAL
??????????????????? ■ SERIAL SPEED
??????????????????????? 19200
??????????????????????? 38400
??????????????????????? 57600
??????????????????????? 115200 (Default)
??????????????????????? 230400
??????????????????????? 460800
??????????????????????? 921600
??????????????????????? 1843200
??????????????????????? 2000000
??????????????????????? 3000000
??? DFU (for flashing firmware)

● MODE
??? Return to LOW in
??? Switch to HIGH in
??? Switch to LOW out
??? Switch to HIGH out
??? Cal.output: OFF
??????? 30 MHz
??????? 15 MHz
??????? 10 MHz
??????? 4 MHz
??????? 2 MHz
??????? 1 MHz