开云体育

Nailed it. Many thanks ! 73 Manuel; DL2MAN

OK, sorry... I saw there?s a capture function in the TinySA.exe.....

Hi Eric, I could not duplicate it with Version 1.0-81. Thanks ! Regarding your other points: You can see from my "Screenshot", that my fundamental was externally attenuated to -27,6dBm and my RBW was

Yes, now I know what the problem is, not time tonight, will be tomorrow.

Manual, Make sure you watch the tinySA signal identification video https://www.youtube.com/watch?v=H5Q9m5877Vk about how to use the attenuator to make sure what you measure is actually present and not

Just done a test .. If I start with *low* mode and recall a preset saved for *high* mode, the problem is there - *can't* enter a new set of start/stop frequencies. If I start with *high* mode and

Looks like you've fixed the problem I had with adding new markers - they all showed 0Hz, they now show good :) Thank you Erik.

OneOfEleven Is this? with presets you recall when in high mode? Or with a preset made in one mode that you recall when being in another mode. There is some "area of uncertainty" in the dealing with

New FW released Version V1.0-81 Changes: - Corrected a number of marker frequency bugs. I must have been interrupted during the updating of the marker frequency mechanism and forgotten to finish it. A

Manuel, If you are running Windows then I suggest either OneOfEleven's NanoVNA_Win or Erik's tinySA.exe application for capturing the tinySA screen.? For Linux or MacOS then NanoVNA-Saver is your

I haven’t used it but I believe they are using the tinysa.exe program available at https://tinysa.org/wiki/pmwiki.php?n=Main.PCSW -- 73, Tripp Sanders K5TRP

For me I use my own software (currently NanoVNA-App) to capture the screens Manuel. I also use it to upload new firmware to the TinySA. Does TinySA-saver not have the screen capture option ?

Standard Windows screen capture:? Alt+PrtScrn will copy the current highlighted window to the clipboard. If you click anywhere on the open desktop area and do Alt+PrtScrn, you will get everything you

Thanks for trying to confirm my results ! Please allow me an off topic "Noob" Question: How do you capture those nice Screenshots ? Seems much better then fotographing the display ;) 73 Manuel; DL2MAN

Chris, Yes, I could not confirm the issue using full span or using the internal calibrator signal.? Once I used an external CW signal and matched Manuel's settings as closely as possible I was able

Herb, I cannot confirm this error. I did upgrade to version 1.0.80 too and did the following experiment: - connected High-and Low ports with a short semiflex cable. - CW Generator on High Port on (10

Erik, Using Manuel's settings, I can confirm the issue he reported using the latest version 1.0-80.? Setting up the measurement using 'Measure->Harmonics', I could only see the GHz suffix appear

Thanks. Will test later today when back home

Yes, when I?m back home this evening.

Can you test with the latest FW?