Re: Firmware Update Question
Brent,
Make sure you are pushing the FW _to_ the device and not reading the device.?
There are two functions of DfuSe. Make sure you click on the UPGRADE button, not the Upload, which reads the device's FW.?
If you used Upload, you've overwritten the new FW file. Delete it and replace it with a new copy then flash again using UPGRADE this time.?
... Larry
On Mon, 24 Aug 2020 at 11:01 PM, Brent DeWitt <bdewitt@...> wrote: I'm clearly missing something.? I used the update files pointed to in this thread with the DfuSE Demo (V3.0.6) and all _seemed_ to go well, erasing, writing and verifying, but after a power cycle reset, the version still read V1.0-39 unlike the file name of V1.0-59.? I _think_ I've read all of the update procedure and the ST Micro tool doc, so now I'm unsure what else to try.
Note that I just received my tinySA today from AliExpress.? About 30 days transit time and it arrived in great packaging and perfect shape.
Thanks in advance,
Brent, AB1LF
|
On Mon, Aug 24, 2020 at 10:54 PM, Lee wrote:
Is there a good source from China or elsewhere with fast shipping??
I just received mine today and ordered directly from Maggie on 07/24 via messaging using the to ask how to make payment for via paypal from this link:
The total was $64.59 usd, though if I understand correctly that was for HKDHL and shipped out faster since was sold out at the time I ordered and they were waiting for the next production batch. ?The progress was updated with confirmations via email after a few days and the service is the best I've experienced on Aliexpress.? Really excited, even being so busy at the moment!
|
Re: Firmware Update Question
Something did go wrong with your FW update as the version should read v0.1-59.
|
In a couple of weeks there will be a large batch available on Amazon
|
Waiting for Amazon to get them .?? They have a lot of NanoVNA at reducing prices.?? Is there a good source from China or elsewhere with fast shipping?? Hunting for some QRM.
|
Re: Firmware Update Question
I'm clearly missing something.? I used the update files pointed to in this thread with the DfuSE Demo (V3.0.6) and all _seemed_ to go well, erasing, writing and verifying, but after a power cycle reset, the version still read V1.0-39 unlike the file name of V1.0-59.? I _think_ I've read all of the update procedure and the ST Micro tool doc, so now I'm unsure what else to try.
Note that I just received my tinySA today from AliExpress.? About 30 days transit time and it arrived in great packaging and perfect shape.
Thanks in advance,
Brent, AB1LF
|
Re: Some tinySA questions
Thank you.
El 24/08/2020 a las 18:01, hwalker
escribió:
On Mon, Aug 24, 2020 at 08:49 AM, EB4APL wrote:
.....Is there a more recent version of tinySA.exe than
1.0.7528.21513?
=======================================================
Ignacio,
? ? The latest tnySA.exe release can always be accessed using the
following links:
? Indirectly:???
Directly:? ??
?
? The current latest version is dated:?2020-08-11
- Herb
|
|
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
|
|
Re: Adding an LNA to the tinySA
Could you link to your source of the amp?
Thanks, Roy WA0YMH
On Mon, Aug 24, 2020, 12:49 PM Erik Kaashoek < erik@...> wrote: For those that want to do QRM hunting, having a LNA with the tinySA would be nice.
This can be easily done in about 10 minutes.
More detail here:?
Result: noise floor with a 3kHz RBW at -135dBm
|
Re: Adding an LNA to the tinySA
HI Erik,
? Great! ?Would be a good idea to list the maximum current draw of the VDD pin right there on the LNA page. ?Certain amps are hungrier than others and I'm not sure offhand how much you can draw before starving the rest of the board.
73
Phil W1PJE
|
Re: Some tinySA questions
There may be a newer version, but it is not uploaded to the link above. The currently available version is 1.0.7528.21513
|
Adding an LNA to the tinySA
For those that want to do QRM hunting, having a LNA with the tinySA would be nice.
This can be easily done in about 10 minutes.
More detail here:?
Result: noise floor with a 3kHz RBW at -135dBm
|
Re: New FW release: Add marker PEAK SEARCH
On Mon, Aug 24, 2020 at 08:48 AM, Erik Kaashoek wrote:
Release V1.0-59 that solved problems 1 and 3
Solving problem 2: when multiple marders AND display paused AND dragging a marker the marker info is not updated
will take some more time.
Erik, ? Just updated to v1.0-59.? Internal attenuation issue is resolved.? Still having issue with problem 1 as follows: Turn on marker 2? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?marker->peak search.? Afterwards can only use the wheel to? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?move right from peak. Left from peak is not working.  ? ? ? ? ? ??  - Herb
|
Re: Firmware Update Question
Thanks for the guidance. Got the Firmware updated and it still works.
Major accomplishment for the day.
73, Dick, W1KSZ
toggle quoted message
Show quoted text
On Mon, Aug 24, 2020 at 08:57 AM, Dick wrote:
There is a DfuSe Demo, is that it ??
Yes
|
Re: Firmware Update Question
On Mon, Aug 24, 2020 at 08:57 AM, Dick wrote:
There is a DfuSe Demo, is that it ??
Yes
|
Re: Firmware Update Question
Dick?
Yes, you should download and install?
STSW-STM32080
If you are on windows you can also update with the dfu-util-static.exe program (if you have the right drivers installed)? you can find here:?
DFU_LOAD_BIN.bat contains an example how to use
There is also a manual of dfu-util available
ATTENTION:? dfu-util uses the tinySA.bin file i.s.o. the dfu file
The big advantage of downloading and installing the SW from st.com is that it contains also the drivers that may be needed for dfu mode.
|
Re: Some tinySA questions
On Mon, Aug 24, 2020 at 08:49 AM, EB4APL wrote:
.....Is there a more recent version of tinySA.exe than 1.0.7528.21513?
=======================================================
Ignacio,
? ? The latest tnySA.exe release can always be accessed using the following links:
? Indirectly:??? Directly:? ?? ?
? The current latest version is dated:?2020-08-11
- Herb
|
Re: New FW release: Add marker PEAK SEARCH
UPS It was version revised 0.1.0-58 I updated to so here we go again ? Kind regards Kurt ? ? On Mon, Aug 24, 2020 at 08:38 AM, Kurt Poulsen wrote: The calibration procedure has been corrupted with this new version.
Kurt,
Thanks for testing to quickly!
The level cal problem was caused by the attenuator problem and is solved in v1.0-59
|
Re: Firmware Update Question
Finally got to download the STSW zip file, but do not see anything labelled
DfuSe Tools. There is a DfuSe Demo, is that it ??
Excuse my paranoia, but I have been burned in the past with label issues.
73, Dick, W1KSZ
toggle quoted message
Show quoted text
The site at TinySA.org is quite helpful. But I am having problems updating the Firmware.
It directs me to st.com to download DfuSe Tools. However, when I get there, all I see is
STSW-STM32080 and no mention of DfuSe Tools ???
Am I to concur that the STSW file contains the DfuSe Tools ??
Also, still trying to register on that site to download that file.
Tnx, Dick, W1KSZ
|
Re: New FW release: Add marker PEAK SEARCH
Hi Erik I did see you made a new update and all three TinySA is updated and calibration is OK, thank you Kind regards Kurt ? ? On Mon, Aug 24, 2020 at 08:38 AM, Kurt Poulsen wrote: The calibration procedure has been corrupted with this new version.
Kurt,
Thanks for testing to quickly!
The level cal problem was caused by the attenuator problem and is solved in v1.0-59
|
Re: Some tinySA questions
On Mon, Aug 24, 2020 at 08:49 AM, EB4APL wrote:
Is there a more recent version of tinySA.exe than 1.0.7528.21513?
The latest version will always be here:? The version available is?1.0.7528.21513, so yes, you have the latest version
|
Lee
Brent DeWitt
Gyula Molnar
Dick
Kurt Poulsen