开云体育

Erik, My opinions: Since the table values are applied to one of the 3 measurement traces then I think moving the TABLE (REFERENCE TRACE) menu option to the TRACE menu makes good sense and would be

How about adding under TRACE/CALC a TABLE option. Once CALC/TABLE is selected it is possible to edit the trace table (which effectively is what used to be called the REFERENCE table) Each trace can be

On Sat, Aug 7, 2021 at 10:35 AM, Erik Kaashoek wrote: Would it be better to have in the TRACE menu an option where you set the source of the trace to be either reference 1 or reference 2? Under

Herb, Valuable input. Would it be better to have in the TRACE menu an option where you set the source of the trace to be either reference 1 or reference 2? Under DISPLAY still can reference points

Erik, An additional noticeable change is in the DISPLAY menu.? Some menu options have been moved to the new TRACE Menu and others have been relocated or renamed within the DISPLAY menu. Users of the

Hello Erik, I have adopted my tinySA menu map. As a text file for easier editing. 73, Rudi DL5FA File: ReadMe_tinySA_menu_V1.3-313beta.txt? 2021-08-05? DL5FA Home of tinySA firmware files:

Great! I am happy with the 40 mm hinges and 30 mm screws for now. I already printed a second case in Red for the NanoVNA. I will tell the NanoVNA group about these cases too. Look what a beautiful

Erik, You do it via Wiener deconvolution. I'll put together an example and an explanation. I've never done a decon in the frequency domain using what is traditionally a time domain operation. So it

OK - Here are the links for the two cases on Thingiverse: Original Case: https://www.thingiverse.com/thing:4916912 tinySA-only Case: https://www.thingiverse.com/thing:4925280 The tinySA-only version

Glad it worked for you! Also, I need to correct a statement I made earlier about adjusting the hinge knuckle lengths for the tinySA-only version.? I stated that you could remove 2.5mm of length from

I downloaded it and will try it out. Zack W9SZ

I stuck with version 1 (the "vintage" version, lol), and it is perfect. A bit of fun getting the washers into place, but otherwise, a flawless design, print, and build. Thanks again!

I'm looking for some beta testers for a major FW upgrade. The biggest change is the addition of the TRACE menu allowing much more flexibility in the usage of the 3 traces. Also the MODIFY MARKER menu

Reg, I did once try some postprocessing by doing a deconvolution but that failed, either due to the amount of noise or some computational error. How would you do this RBW enhancement? Many ham's would

For those that don't have access to a 3D printer, the ~$20 Pelican 1020 case is perfect for the TinySA, NanoVNA or SARK110. I simply folded a paper sleeve to protect the screen, and all the

I'd like to note that *any* filter shape desired is easily produced in the least squared error sense by a Wiener inverse filter of length N. Every FFT based SA I've looked at has had a "most wanted"

Will do - thanks! I will likely add the smaller case to Thingiverse at some point soon.? Maybe I will shrink the hinge knuckles to work with a shorter fastener (30mm is probably a more common length

The NanoVNA comes in several models. The first was sort of an open PCB. The NanoVNA-H has a plastic case, and was the template for the TinySA (same hardware inside too). There are later NanoVNA models

Looks good!? I didn't realize that NanoVNA was physically identical to the tinySA - I swear I saw images of that before that were more of an "open" PCB design with no case/housing. If you really

Works nicely, Thanks! It took me 4.5 hours to print the bottom part and 3 hours for the lid (with room for foam). Printed with supports only under the hinges, not inside, but I didn't manage to remove