开云体育

Erik, Thanks for implementing the step function in the LO output.? Works great! The step in the LO frequency was also a good idea. Roger

OK I downloaded and installed the latest firmware, and am delighted to have the variable frequency feature for FM output.? Couple of questions.... 1) Judging by the sound on an FM receiver, when I

Thank you - definitely I need to look into how to update the firmware then.

WIth the later FW's you can adjust the modulation? frequency so you may need to upgrade the FW -- ------------------------------------------ For more info on the tinySA go to

Have barely used mine so far, so don't laugh, and pardon my laziness for not watching all of the videos, in a bit of a hurry... Started trying the narrow band FM output to check my 2m receiver.? Is

Yep. Forgot to clear screen after display test. Is gone when selftest finishes. -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

I already noticed it with the older release. Patrice. libero.it@groups.io> a écrit :

Hello Erik, the modification for level and frequency output works well.But, photo attached, I noticed at the end of self test some graphic lines at the bottom of the display never seen before.

Bonjour https://www.ebay.fr/sch/i.html?_from=R40&_nkw=metal+nanovna+case&_sacat=0&rt=nc&LH_PrefLoc=3

Found with "shell" here is the link : https://www.ebay.fr/itm/Metal-Shell-Shield-for-NanoVNA-Vector-Network-Analyzer/323988767912?hash=item4b6f3c44a8:g:hYsAAOSwqK1d2AAO gmail.com@groups.io> a

Already did with worldwide area and nothing....

Go to ebay, search for "metal nanovna case" and set the price limit to $20 -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

without the link it's completely useless, except for the show! Le lun. 1 févr. 2021 à 04:30, Clyde Lambert <clyde.lambert@...> a écrit :

I have bought a second Tinysa (as a spare/ in case I misly one.......). I was a bit hesitant about clones and also the huge extra to pay now the UK is outside Europe. I chose what seemed to be a UK

New FW release Version v1.1-80 Changes: - The Low output level button is split in 4 quick up/down buttons and a "set" button to activate the keypad. The slider works as before - The Output Freq

Thanks

I attached the screen shot from ebay. Juts copy the title and search on ebay. As far as the switch mod, it was actually posted in the files on the NanoVNA group.io I will look it up and send the file

Patrice, if you go to Ali Express you will find many android tablets. I chose windows because it? was cheap on sale left over whatever and for the price of less than a dinner out I was willing to

It depends If you want to measure the OIP3 you should use the internal attenuator as high as possible while still seeing the intermodulation products as long as the input level to the tinySA is below

I have a -10 dbm Sample out from an RF amplifier. I see where the max input for the TinySa is -10. Would a 20 dB attenuator give me a reasonable level to the tinySA? Ray