开云体育

Can you push the jog button to the side (NOT down) and restart the device? This should restore the normal scan display Did you connect CAL and RF with a short coax cable when doing the self

The device was purchased on 2023.12.10 from the official AliExpress store "Zeenko Store". I used the device a couple of times during the entire period and was satisfied with the device. In 2024, I

Hi. The situation you have is - honestly - a nightmare. With so many clients in a mesh network you mess up a lot of theoretically available bandwidth, so I am not really surprised about your

The content of this topic does no longer fit in the purpose of this group so I'm closing it. -- Designer of the tinySA For more info go to https://tinysa.org/wiki

On Tue, Apr 1, 2025 at 05:00 AM, Jim Shorney wrote: > > Wow. Just wow. You have created what we call RF Hell. You will inevitably > have a high rate of signal collisions. Also the combined signal

That's what I was hoping a tool like the tinySA could help me determine. For Wi-fi frequencies, an RF scan from my 2 wired Unifi U6-LR APs shows negligible interference on any channel, on either the

Thanks. My guess is that it's from my property, based on low density of building/population around here. 2 houses down is a farm. I could be wrong, of course. For radio reception, I already have an

Don, Thanks for your reply. Response inline. Actually, due to macular degeneration, I really want to be able to set at least the color temperature dynamically, and dim as needed. Some tasks and

I don't see why. If I measure power level x, with a SA And then if I insert a 10 dB attenuator.... I usually see a 10 dB loss... maybe a little more due to connector losses, etc. A matched length of

You can see the loss at a particular frequency... but AFAIK, you can't do a sweep from 470 MHz to 600 MHz, and plot a graph. Because, AFAIK... Tiny SA does not have a tracking gen. (You need one to

Erik, When my refund comes I will certainly be buying from one of the authorised stores that I now know about. Funny how a fake clone makes me discover a new project that I didn't know about.? Life

I prefer to use a more subtle approach, I turn my hot air station to near minimum airflow and apply background heat so that the PCBA is at perhaps 80C, too hot to touch.? I don't bother with Kapton

Well, since over 10 years I'm very happy with my headband magnifier. Those days bought from RS. Article Nr. 606-989 looks approximately the same. It fits also over a pair of glasses. But (yet) I don't

Rainer, Thank you for your reply, and sorry I can't get to everyone's reply timely. Thanks. I'm unfortunately well aware of the MAC address limits. The Ubiquiti APs I use advertise being able to

By a few megaphones and place them around the house. Your RF problems will disappear.... [email protected]> a écrit :

The reason for the Wifi bulbs is not on/off control. If that were the case, I would indeed only be using smart relay switches. The Wiz bulbs allow dimming, setting brightness, color temperature,

I have this same problem! Were you able to resolve the issue somehow? cheers dom

I want to take continuous trace data every 500 ms. I go to level? -> trigger -> and turn on auto save and set the interval to 500 ms. I believe this should give me what I want. However I do NOT get a

You can also do the FFT calculation off line in python if you can capture a data plot from the scope. Most modern scopes let you transfer them to a PC to do this even if they can't do the FFT

Thanks, Erik! I make progress to understand my new TinySa! Dr. Hartmut Brand 72631 Aichtal Von meinem iPhone gesendet Am 02.04.2025 um 14:11 schrieb df2jp_1 via groups.io