开云体育

  1. Tinysa
  2. Messages
Expanded Topics Messages Polls
Date
Re: Screen size #specifications

 

tinySA display, mcu and display drivers are identical to 2.8" nanovna
Re: Screen size #specifications

 

dont know if its the same but i used a 3.2 inch screen with my nanovna,any idea if the same mod works,or will work with this ? ,anyone?,cheers m3vuv.73
Re: How long till your tinySA is shipped?

 

Notification received this morning that my unit has shipped.

73 Dave.
Re: tinySA has been listed in Alibaba store

 

Yes I do that too, I have an old nokia 3210 moby laying around for that purpose. It's interesting to find which internet store(s) sell on your details and/or using them for iffy purposes, these Asian stores are prime for that, there are no morals in profit/business :(


On Mon, Jul 27, 2020 at 05:48 AM, Brian Bowling wrote:
During the checkout process they ask for a phone number.? I gave them an unused number that I've had around for some time.? Within 12 hours of giving that number to them it began receiving unsolicited?text messages from a number of sources.? Just an FYI.
Re: tinySA has been listed in Alibaba store

 

Current lead time is expected to be within 5 days.
How long till your tinySA is shipped?

 

On monday July 27th there is sufficient stock for all orders.
Due to the large amount of orders however it may take some days before your order is shipped.
Re: tinySA has been listed in Alibaba store

 

During the checkout process they ask for a phone number.? I gave them an unused number that I've had around for some time.? Within 12 hours of giving that number to them it began receiving unsolicited?text messages from a number of sources.? Just an FYI.


On Mon, Jul 27, 2020 at 12:44 AM Dave VE3LHO <dave@...> wrote:
Alibaba lists a "lead time" of 25 days. Is the a real lead time i.e. is current stock sold out?

Thanks,
Dave L.

Re: tinySA has been listed in Alibaba store

 

Alibaba lists a "lead time" of 25 days. Is the a real lead time i.e. is current stock sold out?

Thanks,
Dave L.
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

开云体育

Hi Erik and Herb

I downloaded from Erik repository. I did nor found anything on SweepWorker but I am not friend with Gibug.

I did nothing it ran straight away and came up with the S21 screen with level setting prepared. I ran the tinysa-saver.py and not an exe ?if such one exist.

Kind regards

Kurt

Fra: tinysa@groups.io <tinysa@groups.io> P? vegne af hwalker
Sendt: 26. juli 2020 19:49
Til: tinysa@groups.io
Emne: Re: [tinysa] ISSUE REPORT: New release: improved screen capture and better trigger status

?

On Sun, Jul 26, 2020 at 09:04 AM, Erik Kaashoek wrote:

Herb,

Did you test with v0.3 HW.
?I tested and it did not work.

Erik,
? Yes, the screen capture I included was from my SA-20070007 v0.3 unit.? I also experienced the 'invisible trace' issue until the data 0 references were updated to data 2 in SweepWorker.py.? I can't remember if I downloaded your current TinySA-Saver repository or just made the required changes in my previous download.

? Let me know if you want me to look at anything in my current set-up.

- Herb

Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

On Sun, Jul 26, 2020 at 09:04 AM, Erik Kaashoek wrote:
Herb,

Did you test with v0.3 HW.
?I tested and it did not work.
Erik,
? Yes, the screen capture I included was from my SA-20070007 v0.3 unit.? I also experienced the 'invisible trace' issue until the data 0 references were updated to data 2 in SweepWorker.py.? I can't remember if I downloaded your current TinySA-Saver repository or just made the required changes in my previous download.

? Let me know if you want me to look at anything in my current set-up.

- Herb
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

开云体育

Hi Herb

Thank you for the hint. My download was on 25 July so 1 day too early

It works nicely

Kind regards

Kurt

?

Fra: tinysa@groups.io <tinysa@groups.io> P? vegne af hwalker
Sendt: 26. juli 2020 15:48
Til: tinysa@groups.io
Emne: Re: [tinysa] ISSUE REPORT: New release: improved screen capture and better trigger status

?

On Sun, Jul 26, 2020 at 03:25 AM, Kurt Poulsen wrote:

Hi Erik

However I tried the TinySA-Saver and you recommended only to use the S21 Gain. It control the TinySA for a segmented sweep but nothing seen on the S21 Gain screen Any special tricks apart from setting the S21 scales
IT shows a 0dB line ? ??Capture works fine

?

Kurt,
? ?Erik corrected that issue in his last update to TinySA-Saver.? SweepWorker.py should have a 26 June 2020 date.

? ?

- Herb

Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

I also noticed the other day that the S21 display? no longer works in tinySA-saver, but screen capture still works fine.? I had intended to test further, but my life has been so scrambled lately, I think I'm going to start? reporting anything like that immediately and not wait until I have time to explore the issue further.? If I remember correctly, I did get a straight line at zero, as if all the? data it received was zero with no variation.
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

Herb,

Did you test with v0.3 HW.
?I tested and it did not work.
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

On Sun, Jul 26, 2020 at 03:25 AM, Kurt Poulsen wrote:

Hi Erik

However I tried the TinySA-Saver and you recommended only to use the S21 Gain. It control the TinySA for a segmented sweep but nothing seen on the S21 Gain screen Any special tricks apart from setting the S21 scales
IT shows a 0dB line ? ??Capture works fine

?

Kurt,
? ?Erik corrected that issue in his last update to TinySA-Saver.? SweepWorker.py should have a 26 June 2020 date.

? ?

- Herb
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

Something broke during the latest updates before the release.
Re: Listen to received signals?

 

Not possible in this HW version.
Listen to received signals?

Michael Rutkaus
 

After reading all the buzz I ordered one from Aliexpress. I see there were twenty orders from them in the last day or so1

Is there any way to LISTEN to the displayed signals?

73 Mike K4QET


--
This email has been checked for viruses by Avast antivirus software.
Re: ISSUE REPORT: New release: improved screen capture and better trigger status

 

开云体育

Hi Erik

Correction to my mail. The markers work on all three PC’s. MY fault not to provide an input signal of adequate strength. The small spikes on the noise line is not adequate to trigger the marker whivh is quite goof ? Sorry for the noise

However I tried the TinySA-Saver and you recommended only to use the S21 Gain. It control the TinySA for a segmented sweep but nothing seen on the S21 Gain screen Any special tricks apart from setting the S21 scales
IT shows a 0dB line ? ??Capture works fine

?

Fra: tinysa@groups.io <tinysa@groups.io> P? vegne af Kurt Poulsen
Sendt: 25. juli 2020 21:36
Til: tinysa@groups.io
Emne: Re: [tinysa] ISSUE REPORT: New release: improved screen capture and better trigger status

?

Hi Erik

Quite understandable.

Anyway it work now with various small flaws. There is no vertical lines for log sweep. On one computer the markers is not shown on another they are.

And do not change anything for storing when sweeping as stop sweep and do what you like to do such as subtract then sweep again, els crash .
It is a big step forward. I can switch between capture and sweep provided I remember to stop the sweep. !0000point no problem ?

Kind regards

Kurt

?

Fra: tinysa@groups.io <tinysa@groups.io> P? vegne af Erik Kaashoek
Sendt: 25. juli 2020 19:16
Til: tinysa@groups.io
Emne: Re: [tinysa] ISSUE REPORT: New release: improved screen capture and better trigger status

?

I haven't spent enough time in tinySA.exe lately with the various changes in the tinySA itself.

Re: tinySA-H4

 

Yes it possible, but not need. This firmware need only as first step for move tinySA on new hardware (use STM32F303 and more bigger display module). Now possible produce tinySA based on H4 hardware (before use H hardware, but it have some limits, like no FPU, less flash size)

PS yes exist H4+ one SI4432 module as proto-board, but it used as signal generator only.
Re: Tracking Generator

 

As explained in other post, you need either a second tinySA to act as tracking generator or you have to make one yourself with a mixer and a 433.9MHz generator using the LO output?
19221 - 19240 of 19590