Hi Erik

Correction to my mail. The markers work on all three PC’s. MY fault not to provide an input signal of adequate strength. The small spikes on the noise line is not adequate to trigger the marker whivh is quite goof ? Sorry for the noise

However I tried the TinySA-Saver and you recommended only to use the S21 Gain. It control the TinySA for a segmented sweep but nothing seen on the S21 Gain screen Any special tricks apart from setting the S21 scales
IT shows a 0dB line ? ??Capture works fine

?

?

Hi Erik

Quite understandable.

Anyway it work now with various small flaws. There is no vertical lines for log sweep. On one computer the markers is not shown on another they are.

And do not change anything for storing when sweeping as stop sweep and do what you like to do such as subtract then sweep again, els crash .
It is a big step forward. I can switch between capture and sweep provided I remember to stop the sweep. !0000point no problem ?

Kind regards

Kurt

?

?

I haven't spent enough time in tinySA.exe lately with the various changes in the tinySA itself.