开云体育

Hi Erik, That most likely explains how I broke it. Thanks for the Specifications, they should be required reading for people like myself. Stefan K8SEB.

Nice photos. One that stands out immediately is the box. I noticed that (and I am not sure this was mentioned before - sorry if a repeat) the box cover has a decal label and not printed on the box.

New FW release Version V1.1-72 (promoted after beta testing) Changes: - Frequency and Level sliders added in high and low output mode The behavior is described on this wiki

That would imply splitting the range in 3 (or maybe 4) subranges and showing these subranges with the info on the screen. This would be a major extension of the graphing capabilities and not something

Feature to measure 3 frequencies in a mixer. I was using a SI5351 and an ADE mixer, I was doing a test generating 200MHz + 220MHz and getting 20MHz. Everything works very well. So think, there may be

KKMoon was already listed as a seller of clones. https://tinysa.org/wiki/pmwiki.php?n=Main.Buying -- ------------------------------------------ For more info on the tinySA go to

Hi, I have ordered my first tinysa from kkmoon on Amazon some days ago. I cannot remember if they were already negative customer reviews. If they were there, I did not read them. at christmas

Stefan For the input signal limitations see: https://tinysa.org/wiki/pmwiki.php?n=Main.Specification The max continous input level is +10dB The language is indeed portuguese (the brazilian

Hi Hugen, thanks for the response! I have put signals slightly in excess of 20dBm into the low input, I did not realize that would be a problem. Is there a list of Input limitations somewhere? If

Maybe the attenuator of the LOW input is broken. Have you input a signal exceeding 20dBm into the low port? You can refer to this video to check whether the attenuator is worn and

At least the device does perform the main function I want it to do, which is to be able to monitor my HF Radio's Output; It may not be able to accurately measure the Output Level, but it does give

Hi Gary, I reset it by powercycling everytime I go between trying to measure an input signal and generating an output signal from the device. The screen which allows one to set the output signal

Don’t you have to switch it back to low input before you can use as an analyzer? Low output is the opposite of that. Gary W9TD

No, I did not.

I can't not see if the high output level is correct but it looks like something in the low input path is destroyed. Not just one component but multiple like two of the band pass filters or a switch

Hi Erik, The High Output seems to work, see attachments.

Can you check if the high output is still working? -- ------------------------------------------ For more info on the tinySA go to https://tinysa.org/wiki/

The tinySA.exe is the old original pc control program and the tinySA-App.exe is the current app and it is based off of the Nanovna-App. It’s said to be a significant upgrade over the original but I

Thanks, What's the difference betrween tinySA.exe and tinySA-App.exe? Mark

Thanks Sent: Friday, December 25, 2020 12:17 PM To: [email protected] Subject: Re: [tinysa] Virus in TinySA-App.exe