开云体育

I've purchased a lot of them on eBay. Enter "sma attenuator" in the search window. Since I do a lot of microwave construction and measurement, I have a whole set of attenuators that are good to 18

Hopefully in the near future it will be possible. Thank you Ian for your answer. Erik makes a note on the "to do list", ...for when you have the time, Tank you. Toni.

Hi Try version 169 for the larger screen or version 168 for the smaller screen, YMMV.

AliExpress... maybe you get what you pay for. I got my attenuators from Dave's at W5SWL.COM - no problems, easy transaction, prompt shipment. Inventory varies, and it takes a little hunting to find

Hi Toni, There is only SD_Read serial command.? It would need Erik to add a SD_Write command and advise how to use it safely before I could add that. Ian

Ian Jefferson? said:? Are there any 'desirable' features it has that QtTinySA is missing? It is not a feature of the TinySA-App, but it would be nice if we could also upload files from the PC to

> > i have TinySA Ultra with 4" screen!

Yes I did see something in the change log, and so I upgraded to 1.4-166 but it still does not stick.

There was a recent update relating to this issue. HTH. Peter…… /g/tinysa/topic/106386570#msg16951

Herb, That's a good observation on VID/PID, I will have a look at how to handle it.? I have a nanoVNA-F2 from Sysjoint so can do tests with that and my TinySA-Ultra. Although I have tried the

Dave's Hobby Shop (w5swl.com) aften has a good mix of surplus SMA attenuators. Dave is a good guy and I've always been satisfied. I've also found good deals on new and gently used Mini-Circuits

Hello all, Is there a way to have the setting of External Gain be persistent? Since I only have one attenuator and I have it connected always, it is a little frustrating to having to keep setting it

AliExpress carry a big range of attenuators. for a cheap and cheerful 'safty' attenuator there is a board with 30, 20 and 10dB and a 0dB on the same PCB for about $5. Search AliExpress for ...

Where can I get the attenuators for the TinySa?

Aha, I (for the second time) reseated the display cable and ... voila, everything is okay again... Thanks all for your support and suggestions! -Frank

I just tried this from the FAQ: Question *The tinySA Ultra is does not react to touch commands or the jog button* Answer The LCD cable may not be seated correctly. Open the case and carefully lift

The display cable connector has a black plastic clip that has to be very carefully lifted at both sides. This will cause it to rotate up and release the display cable allowing reseating. -- Designer

Hi Roger, I tried your suggestions by keeping the jog wheel (that's what it is called :-)) to the left and power cycled. The settings are not (visibly) reset and the device remains unresponsive to

Hello Herb, I bought the TinySA Ultra at the Zeenko Store on AliExpress... About half a year ago... Unfortunately none of your suggestions help, but thanks for your suggestions. One thing I didn't

All digital (and some analogue) devices emit RF noise, the level depends on how well it was designed. The emissions from the TinySA Ultra are at a very low level and should not be of any