¿ªÔÆÌåÓý

  1. Tinysa
  2. Messages
Single Messages Topics Expanded Polls

Re: Another application example for the TinySA Ultra at >10GHz

 

I always worried that I fry the front end of my Tiny SA.

So I created a 0dbm signal on 10.4Ghz ( measured with a calibrated power meter from work through a 10.4Ghz band pass filter) and measured it with the SA. It showed -34to -35dbm on both units. I then adjusted the level offset by -35dbm and now the SA reads 0dbm +- . this permits me to make visually sure I do not overdrive the input.


John
Join [email protected] to automatically receive all group messages.