On Sat, Dec 10, 2022 at 01:32 PM, MirekD wrote:
The correction table would then serve to respect the connected equipment, (cable, amplifier etc).
In case this correction is not static it may be better to use a separate trace with TRACE/CALC/TABLE-TRACE and use the table to specify the cable/amplifier gain/loss and subtract this trace from your measured trace
You can use 8 frequency/level points to specify the correction, in between frequencies will be linearly interpolated?
The internal correction tables are best used to specify the tinySA itself so you do not need to change them often.
--
For more info on the tinySA go to https://tinysa.org/wiki/
