Okay, Eric, I understand.
I'm gonna describe another little problem. Example:
I set the frequency to 50 to 100 MHz.
I click on the marker, the marker becomes active.
Then I execute: MARKER... MARKER OPS...CENTER
The action executes correctly, but after the action, a triangle
appears in front of SPAN on the bottom right of the display,
indicating that SPAN is active. However, Jog does not change the
value of SPAN where the triangle is, but changes the value of
CENTER.
But I think after the OPS CENTER action the marker should remain
active, Jog should still move the marker.
Mirek
Dne 03.12.2022 v 11:32 Erik Kaashoek
napsal(a):
toggle quoted message
Show quoted text
On Fri, Dec 2, 2022 at 11:55 PM, MirekD wrote:
(TinySA reports it as 511)
Should be ok now.
The generator and the SA use the same backup locations for
frequency and span so when switching between the modes the
frequency will always be reset.
?
--
For more info on the tinySA go to
