Re: TinySA Ultra screen misaligned
|
mine did not have the double sided?tape, it was just floating.
On Fri, Dec 2, 2022 at 5:02 PM Steve Smith < wb9hbh@...> wrote: My screen was the same out of alignment. It cut off the top left corner and info on the display, came from R & L. I carefully opened it up, unplugged the battery and carefully pried
up the display with a plastic car dash removal tool. Slipping under the display and PWB,? and working all the way around it so not to damage the display.
It is only held in place with some double sided tape.
Then realigned it with the markings on the PWB then put it back together.
All of the displays connections are by ribbon cable on one end only.
Case is held together by 4 small screws on the back. Be sure to reconnect the battery and don't over tighten the cover screws.
This is for info only and proceed at your own risk.
Steve
|
Tim K4SHF