Hi Erik

Aha you found it, thank you.

I will test again

Kind regards

Kurt

?

?

New FW released
version v1.0-49

Changes:
- Corrected a rounding error in the level calibration causing up to 1dB level error

Due to a data format change you will lose your configuration information. If you have made any changes you should redoc these after updating.
Both high and low mode level calibration should be re-done using either the built-in calibration source or an external known level signal.
The calibration error off factory should be less then 2dB so after this FW update your levels should be within 2dB without calibration.