SN 20070285
03.297 rx: 12: 95.266M
03.549 rx: 13: 94.934M
03.797 rx: 14: 95.294M
04.052 rx: 15: 95.681M
04.297 rx: 16: 96.069M
04.610 rx: 17: 96.429M
04.859 rx: 18: 96.816M
05.109 rx: 19: 97.204M
05.358 rx: 20: 97.564M
On Wed, 17 Feb 2021 06:05:24 -0800
"Erik Kaashoek" <erik@...> wrote:
New FW release
Version v1.1-88
Changes:
- The spurs caused by the 48MHz MCU clock have been reduced.
- The scanraw command progress is displayed using the green progress bar.
tinySA-App uses the scanraw command and with a large number of points and a low RBW it often is not obvious if the tinySA is still? scanning or how long? it would take till the end of the scan. The green progress bar give better insight in scanraw progress.
The mechanism used to reduce the MCU spurs makes some assumptions which I would like to see verified by some users.
Can some of you test this using the console command:
selftest 6
In reply you get a list of frequencies.
I'm interested in the frequencies listed after 12 to 20
This is what I get.
12:? ?94.602M
13:? ?94.989M
14:? ?95.377M
15:? ?95.764M
16:? ?96.069M
17:? ?96.456M
18:? ?96.844M
19:? ?97.231M
20:? ?97.536M
------------------------------------------
For more info on the tinySA go to
Jim Shorney
