Gentlemen,
thanks for all your tips. Whatever port I plug in, or cable I am using, the tinySA never
shows up in com ports, just in the section of the 'USB Controller' section as an 'unknown device'
Right click and remove / deinstall and power cycling the tinySA results in the same info.
Windows 10/x64 Laptop:
Info: Unknown USB device (error requesting a device description)
in properties: This device stopped because it caused errors. (Code 43) An error occurred while solving the USB device descriptor.
Windows 7 Pro/x64
Info: Unknown device
in properties: This device does not work properly because the device firmware does not provide the necessary resources. (Code 29)
Windows 7Pro/x64
Today this PC did not even recognized the connected device, different cables, different ports, plug-in/plug-out cycling
Have no idea why.
Remark: I am using Windows 7 pro and Windows 10 in German language, the shown messages had been translated.
So, it looks like, the USB section in this clone has a fault and does not report it's device type to Windows.
FYI: I am a developer for Ham Radio software, 'CW via CAT' etc. , so I am pretty firm with all this com port stuff.
Never mind, a hopefully 'real tinySA' was ordered at Aliexpress Zeenko Store yesterday.
