On Thu, Feb 4, 2021 at 03:39 PM, <whyme505898@...> wrote:
Hello, I do not believe I have a clone, I opened the SA up, and it had the version of 3.0,not 4.0,OK. Here is what I have, during the calibration, my SA will not make it past the 4th configuration I believe. Here is a -pic of the issue, does any one have a fix for this, as I tried a few things with the settings,with no luck. I cannot believe this has a issue, had this for a month, first time I am trying to learn this as I am aligning a CB radio,( and trying to figure the tinySA out on what to use and how? ) Any idas would be very appreciated. Thank you,Mark..
I see in your photo that you have a cable attached to both ports and assume you are connecting the two ports together for the self test. ? Have you checked the cable to make sure that it is OK??
If you have changed any of the level settings you can set them back to factory defaults by doing a
clearconfig 1234?command in console mode.? You can use the a terminal app like the free Tera Term? or the TinySA app to send this command.?
Did your TinySA ever pass all the self-tests?? Have you used it anywhere near your CB when you were transmitting?
Roger
Roger Need