开云体育

Yes, the Rhode&Schwarz videos on spectrum analyzers are highly recommended.? That would be an excellent first step as you first need to know how to use your new instrument.?

Here is another from Aglient (ex-HP):

????

And another from Tektronix with an expanded tutorial at the end:

????

While you are learning the basics of the spectrum analyzer and maybe a few other instruments associated with it there are additional local environment associated parameters you need to become familiar with.? Since you do not have a semi-anechoic chamber (lots of $$$$$$), you will need to become familiar with your RF ambient environment.? To do a good job of pre-compliance you need to become familiar with all the RF sources in your area:? WiFi, home solar installations, AM broadcasters, FM broadcasters, TV broadcasters, public services, cell phone towers (be sure yours is OFF while testing), baby monitors, wall warts, appliances, switch mode power supplies (these will be embedded in appliances), ..... ,,,,, ..... what have I missed.? When evaluating a product for emissions, all these and some I've forgotten will be eliminated as radiating from the DUT (Device Under Test).?

Here is a starter on what to look for regarding ambients:

AM Broadcast:? 550 to 1700 kHz? (applies only to conducted emissions)

FM Broadcast:? 88 through 108 MHz

WiFi:? 2.4 ± and 1.85 ± GHz

Home Solar Installations:? Broadband unstable emissions:? LF through possibly VHF

TV Broadcasters:? 54 through 225 MHz and 470 through 700 MHz in 6 MHz "chunks"

Public Service:? 150 through 174 MHz and 700 through 800 MHz

Cell Phone (personal and towers):? 850 ± MHz and 1.9 ± GHz

Baby Monitors:? VHF and UHF

Wall Warts:? These are switch mode power supplies:? 20 kHz through 80 MHz - broadband and

? ? ? ? ? ? ? ? ? ? ? unstable

Appliances:? Similar to "Wall Warts:

GMRS and FRS:? 462.5 through 468 MHz (this is FM)

Amateur Radio:? Consult the following URL: ?

Citizen Band:? 27 ± MHz?

Anything I've forgotten:? 20 kHz through xxx GHz

Some of these are "ON" 24/7/365 and others are intermittent.? For those which are intermittent, it's good to use the "MAX HOLD" function on the spectrum analyzer.?

That should get you going.

Dave - W?LEV

?'r et ve