On Fri, Jan 31, 2025 at 4:30?PM W0LEV via <davearea51a=[email protected]> wrote:
Here are the specifications for the Ultra:
Spectrum Analyzer spec:
Input frequency range from 100kHz to 800MHz (900 MHz for
Ultra+) in normal mode and up to 6GHz ( 7.3GHz for ZS407 ) with ULTRA
mode enabled
Here is a screen shot of both my TINYSAs:
??????
If this email doesn't support embedded imagery, I'll also attach it.
I just tried mine and the maximum settable frequency displays 12.072 GHz.? I tested it at 11.6 GHz and it still registers.?
Is the "Kernal" you are inquiring about?? If so, mine is 4.0.0 - not what you are inquiring about.
Dave - W?LEV
On Fri, Jan 31, 2025 at 9:15?PM David Feldman via <wb0gaz=[email protected]> wrote:
Erik, Isidro,
Returning to old thread. In my recent post #19273 I asked the same question, and this discussion (starting at #8369) is basically identical, so as I read the discussion here, I remain particularly interested in usability (with compromised limitations) in the 5-18 GHz range on the original TinySA Ultra.
I am interested in the result of any test along lines of what Erik suggested in #8485 (at least up to 18 GHz), particularly for the original TinySA Ultra (405) version.