I just received the TinySA Ultra.? ?As a first practical use, I want to measure spurious emissions from my various transmitters.? ?However, I understand that there is a maximum of -25dbm on the low input, and a maximum 30dbm internal attenuator.? By my calculations, this falls far short of even a 1w transmitter.??
?
Am I correct in assuming that connecting a 1w transmitter (an HT, say) to the TinySA via SMA cable to the low input will be definition require a minimum of a 25dbm attenuator plus the internal 30dbm attenuator to get a 1w signal under the -25dbm low input threshold?
?
?
?
?
