I would not trust an attenuator manufacturer that does not mark which is the i/p.
73
Jeff
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of Bruce Akhurst
Sent: 19 June 2024 09:28
To:
[email protected]Subject: Re: [tinysa] Attenuators
Yes
eg check the photos here
on other designs check for a direction arrow
sometimes you must read the spec or assume the male end is the high
ps ive bought several of these and they are good when used correctly. (Check the detail photos ) input end
