Hi. Help please.
I¡¯ve had my genuine Tiny CT Ultra for a couple of weeks now. All going extremely well until today.
I have been saving/loading settings and captures to the supplied SD card from the start with no problems.
Today I wanted to copy a capture shot to my pc. So put the SD into my PC and it was recognised normally (I am used to inserting micro SD cards regularly so I know the card reader is good). Yet if look onto the card in W10 there¡¯s no files visible except a uupd.bin 32,768 KB dated 10/12/2012
It was apparently working fine and there was a few captures etc saved and visible on the card until before I pulled it out of the TInySA. (Yes I did shut down the TInySA BEFORE pulling the card)
Now when I put it back into the Tiny SA the SD symbol lower left goes green as is normal but if I try to load or save it comes up with No Card.?
If I view the card properties in W10 it shows File system FAT. Free space 1.86GB
I tried saving a small file to the SD on my PC. It appeared to save ok, but when I reinserted the SD into PC the file was gone.
So it looks like the few files I had on the card are lost unfortunately. What should I do now? Format the card? Try another SD card? If so what format file system should I use to prepare the new SD card. Is there a card format command on the Tiny SA Ultra?
Any advice welcome please. I don¡¯t want to experiment blindly and risk making things any worse. TINY SA Ultra appears to be working normally, but now refuses to see the card.
Thanks and regards Peter.
