¿ªÔÆÌåÓý

  1. Tinysa
  2. Messages
Single Messages Topics Expanded Polls

Re: Detecting low power motion sensors

 

¿ªÔÆÌåÓý

The Ultra will definitely work up and past 10.535GHz as seen in pics below.

Mike C. Sand Mtn GA






On 10/20/2023 8:51 AM, Martin via groups.io wrote:

On Sat, Oct 14, 2023 at 04:50 PM, ANDREAS Decker wrote:
frequency span 100 MHz, Min Hold, RBW 300 KHz, LNA=ON.
Use a narrower sweep bandwidth, wider RBW and Max hold.

<6GHz the LNA is fine, it gradually gets worse as you go higher in frequency, but you should still be able to see older 10GHz CW doppler radars without too much difficulty, although they are not that stable.

Regards,

Martin

Join [email protected] to automatically receive all group messages.