On Sun, Sep 20, 2020 at 06:16 AM, hwalker wrote:
1. Its not only the second marker that can't be placed on the but also every other marker after that (See chart below).?
Hope OneOfEleven can investigate this as this is something that should work.
2. Some other controls are currently not applicable and should be hidden or disabled (i.e. info panel, Save S1P, Save S2P).? Maybe change 'Save S1P' to 'Save CSV' and save frequencies and values to that format instead.
Will address this
3. Sometimes inter-acting with the touch screen (i.e. changing start frequency) will lock up the tinySA and require power cycling to regain control.? This issue was caused by the serial buffers not being properly cleared and was addressed by either a DiSlord NanoVNA firmware modification or OneOfEleven software modification, I forgot which.
Also here hope OneOfEleven can help here
4. Chart drop down boxes should only show appropriate chart options (i.e. live trace, stored trace, etc.).
Yes, will address this
