|
One other thing.? I thought I?would test
the kit with another computer just to rule out the computer's soundcard
compatibility causing my problem.
My wife just bought a Sony Vaio laptop in August,
and I installed Power SDR on it the same way I did on the Dell desktop.?
When I open SDR all is fine, but as soon as I click the Standby button, the
program powers up and then in about half a second goes back to standby.? I
uninstalled and reinstalled with no luck.? Has anyone else seen
this?
?
Chris
|
Yes, I've seen this on the 0907 release of code when people either copy over a prior PowerSDR.mdb, or for some other reason it the .mdb file does not get created correctly. To try and resolve it blow away the existing PowerSDR.mdb and restart PowerSDR -- it will drive you back thru the config wizard.
I'd be interested to know if this clears it up for you, and if you recall the exact steps you did that got it into this situation. I'm still trying to run down the root cause on this one - welcome to the PowerSDR for SoftRock test team!
Cheers,
Bill (kd5tfd)
toggle quoted message
Show quoted text
At 10:52 PM 10/7/2005, you wrote: One other thing. I thought I would test the kit with another computer just to rule out the computer's soundcard compatibility causing my problem.
My wife just bought a Sony Vaio laptop in August, and I installed Power SDR on it the same way I did on the Dell desktop. When I open SDR all is fine, but as soon as I click the Standby button, the program powers up and then in about half a second goes back to standby. I uninstalled and reinstalled with no luck. Has anyone else seen this?
Chris
|
Hi Chris,
?
Go to the PowerSDR setup book and make sure the
Disable PTT box is checked on the General form.
?
73,
Tony KB9YIG
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Friday, October 07, 2005 10:52
PM
Subject: [softrock40] laptop SDR power
up
One other thing.? I thought I?would
test the kit with another computer just to rule out the computer's soundcard
compatibility causing my problem.
My wife just bought a Sony Vaio laptop in August,
and I installed Power SDR on it the same way I did on the Dell desktop.?
When I open SDR all is fine, but as soon as I click the Standby button, the
program powers up and then in about half a second goes back to standby.?
I uninstalled and reinstalled with no luck.? Has anyone else seen
this?
?
Chris
|
Ahh Haaaa!. That made it seem to be working. At least I see a signal in the panadapter that is changing around -110 dBm. When I disconnect the antenna the baseline drops down to about -130 and stays static. Now I need to find a signal source that I can use to try the setup properly. At 06:23 AM 10/8/2005 -0500, you wrote: Hi Chris,
Go to the PowerSDR setup book and make sure the Disable PTT box is checked on the General form.
73,
Tony KB9YIG Chuck Carpenter, W5USJ, Point, TX -|- Rains Co. -|- EM22cv -|- 72 es 73 50 years -|- 19 - K2OFN and 31 - W5USJ -|- Most fun = QRP since 1984. www.w5usj.com hosted by Hamnutz.com -|- NeTxQRP www.netxqrp.com
|
Hi Tony,
?
Disable PTT wasn't checked and when I checked it
that fixed this problem.? Now on to trying the SR40 on the
laptop!
?
Chris
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Saturday, October 08, 2005 7:23
AM
Subject: Re: [softrock40] laptop SDR
power up
Hi Chris,
?
Go to the PowerSDR setup book and make sure the
Disable PTT box is checked on the General form.
?
73,
Tony KB9YIG
----- Original Message -----
Sent: Friday, October 07, 2005 10:52
PM
Subject: [softrock40] laptop SDR power
up
One other thing.? I thought I?would
test the kit with another computer just to rule out the computer's soundcard
compatibility causing my problem.
My wife just bought a Sony Vaio laptop in
August, and I installed Power SDR on it the same way I did on the Dell
desktop.? When I open SDR all is fine, but as soon as I click the
Standby button, the program powers up and then in about half a second goes
back to standby.? I uninstalled and reinstalled with no luck.? Has
anyone else seen this?
?
Chris
|
??? I'm just going to run the August version, Bill, until
you get it figured out. I'm having the same problem. Re-dumping the 08-17 files
back in the Flex folder fixes it for me. The 20050817 runs good, no problems.
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
Yes, I've seen this
on the 0907 release of code when people either copy
over a prior
PowerSDR.mdb, or for some other reason it the .mdb file does
not get
created correctly.? To try and resolve it blow away the existing
PowerSDR.mdb and restart PowerSDR -- it will drive you back thru the
config
wizard.
I'd be interested to know if this clears it up for
you, and if you recall
the exact steps you did that got it into this
situation.? I'm still trying
to run down the root cause on this one -
welcome to the PowerSDR for
SoftRock test team!
Cheers,
Bill
(kd5tfd)
At 10:52 PM 10/7/2005, you wrote:
>One other
thing.? I thought I would test the kit with another computer
>just
to rule out the computer's soundcard compatibility causing my
problem.
>My wife just bought a Sony Vaio laptop in August, and I
installed Power
>SDR on it the same way I did on the Dell
desktop.? When I open SDR all is
>fine, but as soon as I click the
Standby button, the program powers up and
>then in about half a second
goes back to standby.? I uninstalled and
>reinstalled with no
luck.? Has anyone else seen this?
>
>Chris
|
??? Hmmm, is that a good fix, Tony??
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
Hi Chris,
?
Go to the PowerSDR setup book and make sure the
Disable PTT box is checked on the General form.
?
73,
Tony KB9YIG
----- Original Message -----
Sent: Friday, October 07, 2005 10:52
PM
Subject: [softrock40] laptop SDR power
up
One other thing.? I thought I?would
test the kit with another computer just to rule out the computer's soundcard
compatibility causing my problem.
My wife just bought a Sony Vaio laptop in
August, and I installed Power SDR on it the same way I did on the Dell
desktop.? When I open SDR all is fine, but as soon as I click the
Standby button, the program powers up and then in about half a second goes
back to standby.? I uninstalled and reinstalled with no luck.? Has
anyone else seen this?
?
Chris
|
Wow, I'm jealous, now you can quit your job and work full time for the PowerSDR for SoftRock test team! I hear the pay is fantastic, you know how these Open Software projects are, no expenses are too much, the sky is the limit. At 08:37 PM 10/8/2005, Stan Rife wrote: I'm just going to run the August version, Bill, until you get it figured out. I'm having the same problem. Re-dumping the 08-17 files back in the Flex folder fixes it for me. The 20050817 runs good, no problems.
Stan Rife
W5EWA
Houston, TX
K2 S/N 4216
-----Original Message-----
From: softrock40@... [mailto:softrock40@...] On Behalf Of Bill Tracey
Sent: Saturday, October 08, 2005 12:09 AM
To: softrock40@...
Subject: Re: [softrock40] laptop SDR power up
Yes, I've seen this on the 0907 release of code when people either copy
over a prior PowerSDR.mdb, or for some other reason it the .mdb file does
not get created correctly. To try and resolve it blow away the existing
PowerSDR.mdb and restart PowerSDR -- it will drive you back thru the config
wizard.
I'd be interested to know if this clears it up for you, and if you recall
the exact steps you did that got it into this situation. I'm still trying
to run down the root cause on this one - welcome to the PowerSDR for
SoftRock test team!
Cheers,
Bill (kd5tfd)
At 10:52 PM 10/7/2005, you wrote:
One other thing. I thought I would test the kit with another computer
just to rule out the computer's soundcard compatibility causing my problem.
My wife just bought a Sony Vaio laptop in August, and I installed Power
SDR on it the same way I did on the Dell desktop. When I open SDR all is
fine, but as soon as I click the Standby button, the program powers up and
then in about half a second goes back to standby. I uninstalled and
reinstalled with no luck. Has anyone else seen this?
Chris
SPONSORED LINKS
<>Shortwave receivers <>Ham radio
----------
YAHOO! GROUPS LINKS
Visit your group "<>softrock40" on the web.
To unsubscribe from this group, send an email to:
<mailto:softrock40-unsubscribe@...?subject=Unsubscribe>softrock40-unsubscribe@...
Your use of Yahoo! Groups is subject to the <>Yahoo! Terms of Service.
----------
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.13/124 - Release Date: 10/7/2005 Cecil Bayona KD5NWA www.qrpradio.com I fail to see why doing the same thing over and over and getting the same results every time is insanity: I've almost proved it isn't; only a few more tests now and I'm sure results will differ this time ...
|
??? I'll answer my own question here.....it seems to fix
the problem and I am now working on the latest files as
well.
?
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
??? Hmmm, is that a good fix, Tony??
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
Hi Chris,
?
Go to the PowerSDR setup book and make sure the
Disable PTT box is checked on the General form.
?
73,
Tony KB9YIG
----- Original Message -----
Sent: Friday, October 07, 2005 10:52
PM
Subject: [softrock40] laptop SDR
power up
One other thing.? I thought I?would
test the kit with another computer just to rule out the computer's
soundcard compatibility causing my problem.
My wife just bought a Sony Vaio laptop in
August, and I installed Power SDR on it the same way I did on the Dell
desktop.? When I open SDR all is fine, but as soon as I click the
Standby button, the program powers up and then in about half a second goes
back to standby.? I uninstalled and reinstalled with no luck.?
Has anyone else seen this?
?
Chris
|
??? Hey, whatever works is my motto.
?
?
Stan Rife
W5EWA
Houston, TX
K2 S/N
4216
?
toggle quoted message
Show quoted text
Wow, I'm jealous, now you can quit your job
and work full time for
the PowerSDR for SoftRock test team!
I hear
the pay is fantastic, you know how these Open Software
projects are, no
expenses are too much, the sky is the limit.
At 08:37 PM 10/8/2005,
Stan Rife wrote:
>???? I'm just going to run the
August version, Bill, until you get
> it figured out. I'm having the
same problem. Re-dumping the 08-17
> files back in the Flex folder
fixes it for me. The 20050817 runs
> good, no
problems.
>
>
>Stan Rife
>W5EWA
>Houston,
TX
>K2 S/N 4216
>
>-----Original Message-----
>From:
softrock40@... [mailto:softrock40@...]
>On
Behalf Of Bill Tracey
>Sent: Saturday, October 08, 2005 12:09
AM
>To: softrock40@...
>Subject: Re: [softrock40]
laptop SDR power up
>
>Yes, I've seen this on the 0907 release of
code when people either copy
>over a prior PowerSDR.mdb, or for some
other reason it the .mdb file does
>not get created correctly.? To
try and resolve it blow away the existing
>PowerSDR.mdb and restart
PowerSDR -- it will drive you back thru the
config
>wizard.
>
>I'd be interested to know if this clears
it up for you, and if you recall
>the exact steps you did that got it
into this situation.? I'm still trying
>to run down the root cause
on this one - welcome to the PowerSDR for
>SoftRock test
team!
>
>Cheers,
>
>Bill
(kd5tfd)
>
>
>At 10:52 PM 10/7/2005, you wrote:
>
>One other thing.? I thought I would test the kit with another
computer
> >just to rule out the computer's soundcard compatibility
causing my problem.
> >My wife just bought a Sony Vaio laptop in
August, and I installed Power
> >SDR on it the same way I did on the
Dell desktop.? When I open SDR all is
> >fine, but as soon as I
click the Standby button, the program powers up and
> >then in about
half a second goes back to standby.? I uninstalled and
>
>reinstalled with no luck.? Has anyone else seen this?
>
>
> >Chris
>
>
>
>
>SPONSORED
LINKS
><>Shortwave
>receivers
><>Ham
>radio
>
>
>----------
>YAHOO! GROUPS
LINKS
>
>? Visit your group
> "<>softrock40"
on the web.
>
>? To unsubscribe from this group, send an
email to:
>
>softrock40-unsubscribe@...
>
>
>? Your use of Yahoo! Groups is subject to the
> <>Yahoo!
Terms of Service.
>
>----------
>No virus found in this
incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.344 /
Virus Database: 267.11.13/124 - Release Date: 10/7/2005
Cecil
Bayona
KD5NWA
www.qrpradio.com
I fail to see why doing the same
thing over and over and getting the
same results every time is insanity:
I've almost proved it isn't;
only a few more tests now and I'm sure
results will differ this time ...?
|
