开云体育

Howard Options - TX - SDR TX Support So it has the USB add-on. SDR-Device shows the settings? https://sites.google.com/site/g4zfqradio/installing-and-using-hdsdr and I don't physically see the BPF

Once at Xmit button appeared in HSDR. It has not reappeared. There are PTT options there but not for the RXTX. I do not have the switch tuned version, and I don't physically see the BPF modules on my

Howard, And this is the switch-tuned version? As described here? http://www.wb5rvz.com/sdr/RXTX_V6_3/ I guess Rocky is best for CW, I think that has COM port PTT. Yes, you will need a USB adaptor.

After you install the driver , there is a drop down menu in HDSDR to enable the transmitter function.

Oh, and you need the PE0FKO driver. See notes on fivedash site. http://www.fivedash.com/resource/softwareSetup.pdf Gary W9TD

The PTT is through the USB connection

I bought the rxtx v6.3 transceiver. I tried using HSDR and Rocky software. I don't know how it has a functioning PTT, that is what I am asking for help with. I can't find any documents that

to work. I read I could use an RS232 interface, but my PC doesn't have one, so I would need to get a RS 232 USB cable. Any advice would be greatly appreciated. > Howard, What Softrock? Has it

I just got me RXTX Saturday. I am having issues getting it working. I didn't find clear instructions on how to get PTT working. Tony Parks said that the CW key could be used, but I couldn't get that

Hi to all, Thanks for reading this post. I am looking for a v6.2 20M RXTX built or un-built. However, cost is an issue for me as I rely on SS Disability! Please drop me a line if you have one that you

I am trying to run CWSkimmer with a SoftRock HF RX II receiver. I have a Alex, https://sites.google.com/site/g4zfqradio/hdsdr-cwskimmer-and-Other-Digimodes Do not ask me any more, it's so long

I am trying to run CWSkimmer with a SoftRock HF RX II receiver. I have a Yaesu 5000 and a Behringer sound card. HDSDR is working and I have signals. I have signals in CWSkimmer too, however I cannot

FOR SALE: RX-TX RX-TX built and tested for 80M. Excellent. Includes optional metal case with labels and all documentation. $110 shipped conus KE9UW PayPal

I received a message about selling just 1 kit.. That is my price for 1 KIT.. New Just the Kit was $89.95 plus shipping.. $120 gets you shipping and insurnace 1.a new TXRX Ensamble KIT 2.A new

I have 2 kits and matching cases **NEVER ASSEMBLED**... I recall the cases were made by someone other than Tony Parks. I bought them for a winter project and life happened. This spring my buddy

Guy, Re. I see that my write-up is not clear on this. It is necessary to remove the standard bandpass filter that follows the TX mixer (which restricts operation to e.g. 80-40m) so that the RXTX will

Hi Guy, yeah...dumping watts into a receiver front end isn't good:) Ask me how I know. I rigged up a set of switches a couple of times. It really does keep us in touch with what is happening by

Hi Bill, I read your note somewhat puzzled... I am 64 and have been around a bit..I said to myself "did I say mute?" Sure enough that is what I said. I should have been much more accurate. Muting is

Hi Guy, Ignore the fact that your receiver is an SDR. Ignore the fact that your station is solid state. Look for information about how amateurs have configured their gear for a century to accommodate

Alan, I did try a 50 ohm dummy load and most of the time the combination of PowerSDR with WSJT-X did successfully drive power into the dummy load when the Turn button was used on WSJT-X. Using