开云体育

what did I do wrong on my softrock ensemble rx II? I'm using the cheap little syba (aud20101) usb sound card and this is what I get when I try to use it as my input.

I am planning the build of an Ensemble RX and I am thinking of trying the griddle-heat gun reflow method to install the SMT parts. As far as blocking out time to apply the solder paste and place

Thanks Steve, After I posted I realized it was the FPGA Register Transfer Level code. 73 ... Sid. -- Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and

Hello Sid, The Hermes FPGA code I ported is the stock one used in the full-blown Hermes, DDC/DUC. It has nothing to do with the RTL-SDR and upconverters. 73, Steve KF7O

Original Message ----- Subject: Re: [softrock40] Ensemble II RX problem Looking at your first post I cannot see how the soundcard could be responsible for only getting reception below 10MHz. The

Original Message ----- Subject: [softrock40] Advice re best program for weak signal work

Creative Xfi is my choice...sometimes avail on Creative website as a refurb - what I bought... John - ke5ssh -- John Williams KE5SSH - ham since 2007 WQKA523 - GMRS for family use on the farm

Just an update... Tony checked out the board and all was well. When I received it back I tried using a cheap (VERY CHEAP) USB soundcard and while not optimal the RX at least worked. So it appears

Hi Steve, One question I forgot to ask elsewhere - Is the Hermes RTL code referred to the Hermes code for the RTL-SDR dongle and HF upconvertor? 73 ... Sid.

Hello List, I have been working on a lower cost variant of a DDC/DUC transceiver which I am calling Hermes-Lite. All the details are at https://github.com/softerhardware/Hermes-Lite

Hi, I started building SR Combined Lite 2 for K3 from kit I have bought a long time ago. I got the 32.768MHz crystal from Tony years ago and it is SMD type. It didn't have any info about the pad

I compared the Softrock 144 MHz Ensemble II with my FT290RII, which is known to be a little deaf. They compared favorably in receive sensitivity. I'd recommend adding a low-noise preamp with 20 dB or

Hi all, I recently built the 2m Rx SDR and have everything working fine. I am using HDSDR and WinRad software. Tried to download SpectraVue but had issues. Anyway my question

Yes! Select CW mode and open the "CW Tools" menu. You will be able to select between paddles and the straight key.... and key away! Warren Allgyer W8TOD

And WOW. I had a response from Tony at FiveDash before I'd even sent the above message! Talk about being in the best tradition of ham radio, he's IT!

I recently built the 20M version of the softrock Lite II and enjoyed monitoring CW on 20M. I no longer have an HF station, so this little unit is how I get my "fix". Between one use and the next it

Should you want to eliminate the subharmonic sampling, you can use an ICS501 with the crystal that came with the kit. If you look in the files section, June 26 2007 I have an article called

I got a new computer, a laptop, and with an external sound card I've got my trusty softrock working rx. I want to use it with a straight key, but the laptop has no parallel port... Can you plug a

Original Message ----- Subject: [softrock40] Re: Crystals in Softrock LTE combined kit

Hi Shirley, Mike et All Many thanks for discussing this issue. From my egoistic point of view, using this “sub-harmonic” mode has not only a financial advantage. I’ve remarked that spurious