开云体育

Hi, I've had success in getting a reply from our local rep. See https://www.mitsubishielectric.com/en/worldwide/index.html For your area. 73, M0RVI. Ravi <w4mmp@...> wrote: --

Hi Brent, https://www.rfparts.com/rd16hhf1-501.html 73, Ron / W4MMP

I'm seeing nothing but ebay sources for this transistor and wonder if anybody can vouch for a vendor that isn't selling fake parts? It seems much more stable than an IRF510 at 5-10 Watts. 73, Brent,

You might look at the KerberosSDR it has the equivalent of 4 SDR sticks running coherently linked to a single USB port that will connect to raspberry pi or other linux computer. The designers have

Thanks, Alan - I *knew* something was missing from my post!!! My work is in the low ham bands - primarily 470 kHz to 7.3 MHz working range. The links offered in this thread are very much

Dave You do not say what frequencies you are wanting. The cheap RTL dongles are incorporated in several receivers.

This is not a SoftRock style, but a direct sampling receiver. It offers two channels and it is likely the cheapest option around. I believe LinRad samples both channels and it offers diversity

Hi Dave, Again, different platform, receive only is the SDRPLAY DUO it has 2 separate receivers. And the software SDRUNO that can do this type of

It's a different hardware platform, but there is active work on a 2 antenna setup. https://groups.google.com/g/hermes-lite/c/FYS15G-tWhs Check out the thread and the Hermes-Lite 2 hardware. 73,

Sorry if my terminology is not clear - hopefully someone here can set me straight! I'm searching for SDR software/hardware that can accept two (or more) separate antenna inputs simultaneously, each

I have the following available for sale. RXTX 40/30/20 built in KM5H case. Untested Soft rock Lite SDR DUO (UNBUILT) SOFT ROCK ensemble II (UNBUILT) with KM5H cases QTY 2 each Soft Rock 6, 4, 2

This item is sold.

I have a SoftRock RXTX Ensemble Transceiver Kit that I purchased several years ago along with a KM5H Case. The Power Supply and USB Power Supply sections have been completed. However, work related

No problem Dave. Hope you find a RXTX. Dan

I have an unassembled Softrock RXTX with a KM5H case. Contact me privately at w8lm at arrl dot net. you would be able to select your bands of interest.

Hi Dan I thought it was a RXTX so I am not interested, sorry. Thanks Dave

Hi Dan I would like to buy it if available, thanks, Dave W9DBF

Hi Dan, I would like to buy it if still available, thanks Dave W9DBF

This receiver was built and tested by Tony Parks, KB9YIG and I added the metal case sold by KM5H. The receiver works like new with no issues, I used it last week with SDR Console. The cost is $60