开云体育

If you have VOIP then you have IP available. Ignore the modem. Just like trying to use a fax machine on VOIP it will always be flaky. Put a Terminal Server on the RS232 port.?? I use the Lantronix

Hi, There are many parameters which have affect to the transmitted FM audio level. My procedure to set the primary level is this: 1. TxLevel is set to 84 in the configuration file 2. With the

In regard to the Case #2 argument, I agree with Joe.? If a user IDs at the end of 10 minutes, it doesn't matter to the FCC if it gets repeated or not - YOU are ID-ing for YOUR station on the

Disregard: PTT buffer issue. Bob NO6B

I'm trying to modulate a Kenwood TK-880 via the DI input. Have done this on half a dozen radios, but the one currently on my bench won't modulate. MIC input works fine, but I need the DI input. The

I am using RFAudioBoost = 3 on my 2 repeaters. I adjust TX as follow With MMDVMCAl set for DMR. I adjust software level to 50 and adjust TX pot for carrier null. Put DMRTxLevel to 43 in MMDVM.ini With

Thank you, This is the config that I have been

Good day, I recently updated my Pi-Star and STM32-DVM to the latest and greatest. I see and hear a LOT about the FM Mode that has been integrated, but NOTHING on the configuration and actual running

Brett, I was looking for exactly that text but couldn't remember where I found it! I searched my mailing list archives thinking it was more recent. I wonder if we can get that section promoted to

That’s why you speak your call into your microphone

Hold up. Here is some reading everyone should review. http://www.repeater-builder.com/tech-info/weather-radios.html Scroll down to the heading "A historical note, and a caution on communications with

I never even mentioned repeaters. All amateur stations require a control operator. Not just repeaters. It doesn't make any difference if your transmissions are repeated or not or if you are using a

As can P25 Conventional if you have a radio with Vote-Scan enabled. The argument about trunking is moot as there is not even enough traffic these days to even justify keeping many of the conventional

Conventional DMR Phase 2 can indeed automatically roam. No trunking is required. -- The Real RFI-EMI-GUY

John, I've been playing with Pi-Star and STM32 DVM (Blue) couple of days. Here is my current configuration, I sure you will get clue of this with

Good day, I recently updated my Pi-Star and STM32-DVM to the latest and greatest. I see and hear a LOT about the FM Mode that has been integrated, but NOTHING on the configuration and actual running

My apologies then for somewhat starting this sub thread. I had not seen this when I signed up for the list and while I’d prefer this remain a primarily technical list at times the rules under which

Thank you, exactly the point I was making earlier. Eric Af6ep Sent using SMTP.

That's basically what I said... What happens to his signal through a repeater does not matter as long as the repeater is legal for the control operator (trustee/ call sign on repeater)? license

Sorry Jim, but part of what you mentioned is wrong. When a ham transmits he only needs to be on the frequency and mode he is licensed for.? What happens to his signal through a repeater does not