Thank you,
This is the config that I have been using.
[FM]
Enable=1
Callsign=VA7PRR
CallsignSpeed=20
#CallsignFrequency=1000
CallsignFrequency=880
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=0
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
#AckFrequency=1750
AckFrequency=880
AckMinTime=4
AckDelay=1000
AckLevel=50
Timeout=180
TimeoutLevel=80
CTCSSFrequency=100.0
CTCSSThreshold=30
#CTCSSLevel=20
CTCSSLevel=5
KerchunkTime=0
HangTime=7
UseCOS=1
COSInvert=0
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
?
But I have a question about the :
RFAudioBoost=1
UseCOS=1
The TX Audio seems a Little low when I listen for the CW Callsign, and I'm also getting quite a bit of hiss on the signal too, would that have to do with the COS? I'm using the V3 board myself, and a pair of CDM1250 radios. The COS is not used at this time, I'm sure I have some fine-tuning to do.
John Brent
?VA7WPN
John Brent - VA3HQB