开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
Re: 6 m repeater antenna
Got a picture? Is it a DB212-2 or home brew or what??? [email protected]> wrote:
By Chris Boone WB5ITT · #214110 ·
6 m repeater antenna
Begin forwarded message:
By Roger willey · #214109 ·
Re: Can I use a low power programming cable to program high power astro spectra?
A common problem is that the USB-serial adapter will be assigned a comport number that the software will not show as available to use. Joe, K1ike
By Joe · #214108 ·
Re: Can I use a low power programming cable to program high power astro spectra?
That basic issue is VERY common with software, especially Motorola software, of that vintage. You need 32-bit, and generally a REAL RS-232 serial port. Some of these will work with certain USB
By Jim Barbour · #214107 ·
Re: programming for Kenwood repeaters
Hey Mike, thanks for all the information. I have KPG 91 on the computer. I used program the repeater so shouldn't have a problem. Thanks. Chad Nelson WI9HF/WRPL979 Janesville
By Chad Nelson · #214106 ·
Re: Motorola R100 eeproms or lack of them
your better off picking up a Motorola GR1225 off ebay.. more reliable than the R100 as this unit is completely obsolete. To: [email protected] Sent: Wednesday, March 26, 2025 7:08:57 PM
By MILLIN SEE · #214105 ·
Re: programming for Kenwood repeaters
Yes.? The TKR851s (and 751s) were developed and manufactured after the TKR850 Ver 2s were developed.?? In other words, all of the x51s are Version 2 radios. Between the shop and several local ham
By M M · #214104 ·
Re: Can I use a low power programming cable to program high power astro spectra?
And, (it bears constant repeating) original Astro CPS will launch/run on both 64 and 32 bit Windows but it will only physically talk to the radio on 32 bit. Astro Tuner lets you select higher com
By Bob KK6RQ · #214103 ·
Re: Motorola R100 eeproms or lack of them
The original modules are roughly 4" X 6" and about 1.25" tall, not sure how you would fit anything bigger in there. Then you would have M100s running off a badly designed 35 year old power supply with
By Mike · #214102 ·
Kenwood D700
I am using a Kenwood D700 radio with MMDVM STM32 hotspot I tried using it as a repeater for the local area for emergency and regular use I putting the radio in packet mode 9600 baud open modes
By Robby · #214101 ·
Re: Motorola R100 eeproms or lack of them
Question:Has anybody replaced the original radios in a R100 with M100 radios ?Wd0biaGary
By Gary Schelske · #214100 ·
Re: Kenwood KMC35 Microphone Mod to Improve Audio
Yes, Bob, compared with the Grey KMC 27 mic, the black KMC35 mic does sound good. I am being picky. To me the gold standard mic audio is a Motorola SyntorX/ X9000 with the cap closest to the mic cord
By John · #214099 ·
Re: programming for Kenwood repeaters
Ken, The more I learn and From: [email protected] <[email protected]> On Behalf Of Ken Arck AH6LE via groups.io Sent: Wednesday, March 26, 2025 1:40 PM To:
By Chad Nelson · #214098 ·
Re: programming for Kenwood repeaters
The KPG-91D software is valid for the 750/751/850/851. And it is backwards compatible with pre Version 2 TKRs as
By Ken Arck AH6LE · #214097 ·
Re: programming for Kenwood repeaters
By Les Keegan · #214096 ·
Re: Kenwood KMC35 Microphone Mod to Improve Audio
After 8 years of working with them, and thousands of radios, Ive never noticed any issues with audio quality on those out side of faulty mics that had bad cords or were otherwise broken. Yes, the new
By Jim Barbour · #214095 ·
Kenwood KMC35 Microphone Mod to Improve Audio
At least on the TKX90 mobile radios, removal of chip cap C10 (0.068MF) adds more highs to give more crispness, less muffled voice audio. This is located on the mike PC board with it's location
By John · #214094 ·
Re: Diamond X510HDM help.
Checked them visually and physically and can't see problems... waiting on an LCR meter to confirm... thanks!
By nh6bf · #214093 ·
Re: programming for Kenwood repeaters
Same cable, same s/w. KPG-91D will program both.
By Jim Barbour · #214092 ·
Re: programming for Kenwood repeaters
Cable yes....KPG is different iirc Chris WB5ITT [email protected]> wrote:
By Chris Boone WB5ITT · #214091 ·