开云体育

Your problem isn't the speed of your computer, not with MTR2000 RSS; the crucial thing is it has to be the 32 bit version of windows for the communications to talk to the radio. Same thing for

Am looking for the 25-pin DSUB alignment cable that goes with Vertex FIF-12 programmer and CT-49 alignment software. Have the FIF-12 interface and frequency programming interface, but not this cable.

I have a TKR-850-1 that was working fine but now powers up with an E2 error code channel data not written. Can read radio and all data is read and good. Tried rewriting data with negative

<-- Hi Andy... doh, thanks for checking and pointing out a "drawing error".? I have updated the drawing post haste! Good catch! Ramesh, VA3UV, WA3UV

Hey Ramesh, Was the shield supposed to be hooked to ground instead of red? Andy wrote:

Ramesh Dhami &#92;(VA3UV&#92;) <Ramesh@...> added folder */Motorola 2600 Series Communications Test Set* --- The following items have been added to the Files area of the

Thanks Sent: Tuesday, March 18, 2025 9:36 AM To: [email protected] Subject: Re: [repeater-builder] Kenwood TK 8360 question Hi Chad, I have an 8360 that I use as a UHF base station

Hi have a 8180 and the audio doesn’t sound as good as the 8302. That is my main complaint I suppose. Sent: Tuesday, March 18, 2025 9:43 AM To: [email protected] Subject: Re:

<--- Finally got my hands on a used Acer V196WL monitor this morning... VOILA! I'll add this info and the "tried and tested" monitor info on the cable drawing and post later. Thanks, Jared and

In my years of programming Kenwood radios from 450 down to 440, usually the only thing that requires tweaking is the VCOs. They'll take the frequencies. I ran a TK7180 and 8180 mobile and they worked

Hi Chad, I have an 8360 that I use as a UHF base station radio in my shack. The CPS complains when I program "unsupported" frequencies, but so far I haven't had issue as long as I stay as high as

Mike So, do you still want a 7/8" NF connector for Annular heliax cable? Solid center core, non-solder, slip on center pin. The ?" cable center pins are soldered on. Please LMK.

Turns out my 4 year old i7 desktop is just too fast, even in a virtual machine. Oracle's VirtualBox has a mechanism to slow down the virtual CPU, it's called Execution Cap. I set it to 25%, RSS works

It's running on a remote mini PC and Win11 is bloatware. ( I do run it on my workbench computer at my shop under Win11, Win7 compatibility as you point out) Ken

Quantar? I run it straight on Win 10 64 bit using win 7 compability...no issues at all [email protected]> wrote:

I'm running R14.10.00 in a Win7 VM under Proxmox (at a remote site) with zero issues Ken ------------------------------------------------------------------------------ President and CTO - Arcom

I use XP Professional 32 bit, inside VMware workstation 17 player (free), on a Windows 11 machine with a usb to serial adapter. Sometimes I get a "framing error" when starting a transfer, but the

I know with the XTS3000 RSS the trick to making that work was the Virtual machine has to be running a single core 32 bit processor. [email protected]> wrote:

The answer is: MX-COM CTCSS PCB. GOOGLE MX-COM. Joel W6BQD [email protected]> wrote:

I use Oracle VMBox .. win 10 and loaded XP SP3 in the VM....works fine on my MTR2000s Chris WB5ITT [email protected]> wrote: