开云体育

Almost any Kenwood with the model TK-7xxx will do those splits. The Kenwood repeaters TKR-750 and 751 will also do those splits. Roger, N5QS

Hello Tim, For mobile radios, the M1225 and CM300 will both work for narrow band. I would be very sure the P1225 and CP300 portables will also. Mick - W7CAT

I meant to say Part 90 services..... -- The Real RFI-EMI-GUY

When the FCC (AKA Motorola) mandated narrow band for Part 95 services, they forgot that a small number of VHF channels, primarily VHF mutual aid channels required 2.5 KHz resolution. Because

Hi folks, I'm in Wa. state and WWARA has authorized me a NB rpt. pair 146.6875 out / 146.0875 in. (2.5 kc / 12.5 kc ch. spacing) My rpt. is a Motorola Quanter. I now am searching for compatible radios

One wire, ground, should be easy to figure out. Your +V should also be easy to trace. The output should be coming from the pot through a electrolytic capacitor... I don't think there's a line you need

Good afternoon, I have a couple of the Tait TB-9300 VHF repeaters for sale - currently they are set for Tier 3 DMR Trunking. These are complete units - reciter, 100w PA, and 48vdc to 24vdc power

Thank you Chris, At least now I know the frequency table of the CTCSS IC. I will know have to do some reverse engineering to figure-out what wire does what. Unless a member would know what

No ...16/32 channel synthesized...smaller box, different control head .. Chris WB5ITT gmail.com@groups.io> wrote:

Hello, Ed! Are these radios from the same family as the GE MASTR II?

It is but dip switch selectable... it'll work Chris WB5ITT gmail.com@groups.io> wrote:

Looks home-brew to me. Chuck WB2EDV

https://www.alldatasheet.com/datasheet-pdf/download/402920/CMLMICRO/MX335.html ve2reh.com@groups.io> wrote:

Hi to all, I just bought this ctcss board on a local hamfest but cant seam to find the documentation of it. I am hopping a member would reconnize the make and model. Thank you for looking. Best

I have been using Ooma Teleo for my landline for some time. You buy their ATA device and pay about $7 a month for taxes. It works well for outgoing DTMF. There may be some problems with incoming DTMF.

* Magic Jack is a VOIP ATA that uses a PC for the processing...the MJ is an external dongle * that provides the analog output to a RJ11...it is not a standalone ATA iirc..one local radio * station

Magic Jack is a VOIP ATA that uses a PC for the processing...the MJ is an external dongle that provides the analog output to a RJ11...it is not a standalone ATA iirc..one local radio station used it

I'm looking for some help with getting a GPIO command setup for a repeater disable function. We have had a little bit of interference from so people and want to be able to turn the repeater off for a

I did not know the term was "magic jack". I was tought it was a ATA connection. I guess I missed all of that. -- - Regards, Karl Shoemaker To contact me, please visit SRG's web site at

Below is an update on the schedule of speakers and presentations for the Southeastern VHF Society Conference. The conference will be held at the Quality Inn at Exit #4 in Clarksville, TN April 4-5,