开云体育

Have you tried doing a packet RF link to the controller? Just a thought if the site is far away. -- Regards, Karl Shoemaker To contact me, please visit SRG's web site at http://www.srgclub.org for the

Mike, Hey ...it's really good to see you back on here posting again. I have one of these power supplies that I starting digging into also. It's been a while since we talked on the phone but if you

You could put a block converter in front of the VHF receiver. Many years ago I heard of a voting system that used a number of VHF to UHF crossband repeaters as satellite receive sites. They all

I have two 100w UHF MTR2000s that are perfectly good but the AC side of the power supplies are dead.... they work fine with a 24 or 28v DC supply of adequate current... But I'd like to get the AC

If you have VOIP then you have IP available. Ignore the modem. Just like trying to use a fax machine on VOIP it will always be flaky. Put a Terminal Server on the RS232 port.?? I use the Lantronix

Hi, There are many parameters which have affect to the transmitted FM audio level. My procedure to set the primary level is this: 1. TxLevel is set to 84 in the configuration file 2. With the

In regard to the Case #2 argument, I agree with Joe.? If a user IDs at the end of 10 minutes, it doesn't matter to the FCC if it gets repeated or not - YOU are ID-ing for YOUR station on the

Disregard: PTT buffer issue. Bob NO6B

I'm trying to modulate a Kenwood TK-880 via the DI input. Have done this on half a dozen radios, but the one currently on my bench won't modulate. MIC input works fine, but I need the DI input. The

I am using RFAudioBoost = 3 on my 2 repeaters. I adjust TX as follow With MMDVMCAl set for DMR. I adjust software level to 50 and adjust TX pot for carrier null. Put DMRTxLevel to 43 in MMDVM.ini With

Thank you, This is the config that I have been

Good day, I recently updated my Pi-Star and STM32-DVM to the latest and greatest. I see and hear a LOT about the FM Mode that has been integrated, but NOTHING on the configuration and actual running

Brett, I was looking for exactly that text but couldn't remember where I found it! I searched my mailing list archives thinking it was more recent. I wonder if we can get that section promoted to

That’s why you speak your call into your microphone

Hold up. Here is some reading everyone should review. http://www.repeater-builder.com/tech-info/weather-radios.html Scroll down to the heading "A historical note, and a caution on communications with

I never even mentioned repeaters. All amateur stations require a control operator. Not just repeaters. It doesn't make any difference if your transmissions are repeated or not or if you are using a

As can P25 Conventional if you have a radio with Vote-Scan enabled. The argument about trunking is moot as there is not even enough traffic these days to even justify keeping many of the conventional

Conventional DMR Phase 2 can indeed automatically roam. No trunking is required. -- The Real RFI-EMI-GUY

John, I've been playing with Pi-Star and STM32 DVM (Blue) couple of days. Here is my current configuration, I sure you will get clue of this with

Good day, I recently updated my Pi-Star and STM32-DVM to the latest and greatest. I see and hear a LOT about the FM Mode that has been integrated, but NOTHING on the configuration and actual running