开云体育

Does anyone have a schematic for an Astron RS-12A? A person emailed me directly and ask for a copy which I could not help with. If you do, can you scan it and email it to me. Required size is

I was asked to post this again, so here goes.... Hello All, I recently received several requests from people on the list wanting to obtain the large heat shrink I use to seal the Comet and Diamond

Hi Joe,would sure appreciate the help if you could recall how to do the programming. Doug VE6ZH ----------

Michael Lussier wrote: If you are on 2 meters or lower, you can point three in the same direction and the fourth in another, but the elements cannot be at the same level (elevation). You will,

Anybody happen to have any spare channel elements for Mocom 70's? If so, please contact me privately with your asking price. Thanks. Jeff,

I am looking for some help with antenna questions for my GE MASTRII/RANGR Repeater What is the consensus on 4 bay dipole arrays for repeater antennas ? I have looked into the coverage maps with both

I am looking to buy or trade for a 220 MHz duplexer. Contact me direct please. Thanks -- Richard D. Reese WA8DBW Voice 330-335-0122 http://www.wa8dbw.ifip.com

I'm using a PSX-SE on UHF, so I must have programmed it for the ham band, but I don't recall how. I probably had to edit the hex data. If you can't find anyone else who can do it, I'll research it

Will do Ralph,have a friend in the mobile buiss.,he can do the vhf versions but not the uhf. Doug Ve6zh ---------- uhf's I like to do. some! GE

Doug, If you find out on the phoenix-S, let me know too. I've got a couple of uhf's I like to do. BTW Kevin, thanks for the heat shrink source. We will definitely get some! Tnx, Ralph WB4TUR

Kevin,i was able to read all messages today.Back to the question on the GE uhf Phoneix,anyone have info on reprogramming for the ham band?? Doug VE6ZH ----------

oh well i got all the pins out for the back of the radio and they have great rx in ther i use one for tx and one for Rx for a repeater they work great.....i can give u that and i am working on putting

looking for a schematic for these radio for the single channel and 2 channel .. Ge Century II UHF MOBILE Comb: M5A15 FCC TX data: KT-180-A FCC RX data: ER-116-A Brent DeSalvo

bill wrote: What controller do you have? What radio do you have available for the remote? What band(s) do you want to link to? Kevin

Brent, Well, I was going to try and crystal mine up for an uhf link radio. Pin outs would really help! So would any tune up instructions you might have. Thanks! TD

kevin i was thinking about building a remote base out of a 261a kenwood. would you happen to have any info on doing that I've built repeaters but never a remote base,thank you. bill--k5py

kevin do you have any information on putting together a remote base. I just never did that and i'am think about doing it. I think it would be fun to do. thank you bill brown-----k5py.

Brent, Say, if you get a schematic, could I get a copy too? I've got one laying around but I've never done anything with it for the same reason... 73 Tracy

"D.J.H." wrote: Ok, I am not sure why you are only seeing message headers when html is present. ?????? You can upgrade your Explorer to version 4.something for free

Bill, Tracy, K0DOE, here. I built a dual band remote using a Kenwood TW-4000A. Works great! I used the controller momentary outputs to 'strobe' (ground) the mic up/down switch for frequency change.