开云体育

Let me dig thru my stash and I'll let you know Chris [email protected]> wrote:

Perfect answer (TARRA) via groups.io <tarra@...> wrote:

Let's get down to the nut cutting, shall we? WHAT causes the message to be sent? If that message is NOT SPECIFICALLY ALLOWED in part 97 like NWS, it's ILLEGAL PERIOD Chris WB5ITT [email protected]>

Get this thru your head Tom...Any message transmitted by an amateur station, NOT SPECIFICALLY ALLOWED in Part 97 , is third party traffic and must be under a control operators control. Sorry but it

That is improper control of an amateur transmitter..it can only be keyed by certain. equipment as allowed per Part 97. The control function activating the sirens is NOT permitted. I consulted Riley on

I'm trying to get rx audio from the mic jack on my CDM1250. The pinout says it is the same as the maxtrac and I should have rx audio on pin 8, however it isn't there. I'm using a signalink USB and

I have a good condition works fine Kenwood TKR 850 Peter with about 30 W output and the receive sensitivity is about .25 mill volts. It will come with a power cord with Anderson power poles on one

"If you have a relationship with your local EMA" It never hurts to also have support letters - emergency manager, sheriff, fire chief. One time when I was trying to get a site I had a meeting with the

There are so many variables in this situation. I would immediately write off trying to work with any commercial tower firms (Crown, American, Vertical Bridge, etc.) ONLY approved contractors and

I've been involved over the last 50 years with a group that has had several 2m/440 repeaters located on 2000 foot TV towers. We were able to get sites on the towers mainly due to our leader working

People skills really help. Sometimes the city will allow the install if a approved contractor does it. wrote:

We were fortunate enough to make connections with the local hospital. Our DB-420B is atop an 85 foot building. Our D-Star repeater is in an electrical room on the top floor. 60 foot feedline length.

I do not. I live out in the country. We have horses still. So its that kind of out in the country.

Do you have any tall buildings around ? Dave Bates [email protected]> wrote:

I've been debating on trying to aquire a site to put a repeater vs here on my vertically challenged tower. In the past I've found contact information & asked tower owners for space. But this was

Hey Jeff, Maybe a step by step on repeater-builder should be written on converting both halves of a DB-420 to (2) DB-408's (with pictures). Sometimes a 408 is just better for the particular situation

Purchase from Yaesu America parts.? I ordered?EH063U90G?but you want to call to make sure part is still current.? I find Yaesu America parts to be very responsive. RichardKD5URB

Does anyone know where to get the service manual for the DR-2X? ?I have tried OEM's site, manuals dk, etc but nothing yet. -- - Regards, Karl Shoemaker Please remember not to reply (email) from this

Now that I think about it, and assuming my memory and visualization of the DB420 harness isn't failing me, if you cut that half-antenna feeder cable off as I described, then took the harness off and

In my testing the load was indeed going to be taking half the power. After all that is what the harness is supposed to do, divide power for both 8-bay halves to work properly. The purpose of using a