开云体育

Actually, this one looks new ... https://www.ebay.com/itm/186223564153 Andy

There are some on eBay. However, many parts are pulls (even though they claim new). Just saying it could be worth a try. [email protected]> wrote:

It is only for weather warning

Have a VXR-7000 with no power out. S-AU93 module apparently 'cooked'.? Various datasheets suggest this is a 50-60w part Hard to find a source, most searches end up referring to an S-AU3 - RF Parts...

Hi folks, As one of the RB moderators, going to go out on a limb and declare this equine deceased , and declare the thread closed Cheers! Martin Flynn W2RWJ

Hey Roger. I did revisit Part 97. 97.113 States in part: "No station shall retransmit programs or signals emanating from any type of radio station other than an amateur station, except propagation and

Go back to your technician study guide. If you don't understand the need for a license to transmit you need to surrender your license and we don't need to try to educate you on this forum. I suggest

That's exactly what I was trying to get out, the same thing Chuck said. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

Please cite your source for those of us following along. Thank you! ?? -Adam WJ4X

There doesn't need to be. It is activating a transmitter in the amateur radio service. That's enough. You need to learn how to read. Same with your beaconing non-sense.

What Chuck said. A code set off by a local agency, which action causes a station in the amateur service to transmit, is illegal. Only the exceptions listed are legal-NOAA/NWS weather radio, and NASA

/g/repeater-builder/topic/measuring_cable_leakage/97569318

Here is what I found on coax leakage. https://www.repeater-builder.com/antenna/andrew/andrew-shielding-effectiveness.pdf

Coupling through coax shield does happen but it is really low but not zero. ?There is leakage through the bottom covers since it’s only a press fit and not a perfect fit especially after it is

Dumb questions?it is all this testing being done at the site. Or on a work bench away from the site.?What trims the notch? A small pico trimmer cap? Seen them look good. Yet. Not be good.im seeing

Harold That's interesting. The cans are suspended in the air. So they don't touch the cabinet mostly. I'll take that into consideration though. I greatly appreciate the help in trying to help diagnose

You'l would probably need to build something, but you could use an 8870 tone decoder and take the DTMF strobe signal to feed a Latch circuit, That way you don't need an exact code. Then use that

Setting the insertion loss higher will improve the mid band isolation too. I forgot about the cabinet. Take them out of the cabinet. There might be some coupling through the bottom covers to the metal

If anyone is interested, I'll be selling some of my 6 packs......BNC and N type connectors ...... Let me know.. [email protected]> wrote:

That's my point exactly Chris, that's what I was trying to say that you cannot have someone sending out DTMF tones that's going to somehow along a chain control and amateur repeater that is not legal.