开云体育

Hi, Sorry for the late reply. I was still trying but I have officially given up on the ics. Did you have a northcomm? Thanks Robert [email protected]> wrote:

Please see: https://www.repeater-builder.com/motorola/spectra/spectra-index.html I'd guess that you'd want to look at any sort of Data PTT function the radio may have. Hopefully someone will chime

All, On batlabs's spectra page it mentions that there is an option on the analog spectra to do flat tx/rx audio which I need for some data purposes,? It also mentions that hte info is in the service

I've searched the existing topics without finding what I need. I have an RC-100 that's working well, but I'd like to disable the base station timeout. I have worked with the tones, but it's been a

Same cable as used on the Midland Base Tech II and III stations, if that helps. They are rebadged KG510s. Chris/AJM -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET Cal. Intertie (KB3PX)

That is correct. Fortunately, Kenwood did correct that oversight in their new NXR-1000 series. ALTHOUGH, I'm disappointed there are no options to be able to control encoded CTCSS/DCS via external

Correct me if I'm wrong (Ken??), but the D710 doesn't have the facilities for use with an external controller, specifically the audio I/O. I had a few of these and sold them for this very reason. They

A Quantar chassis is universal, you can put in any modules and it all works the same. I agree on checking the transmitter power alignment.

I’ll bet your 900 chassis has a high stability oscillator installed and your 800 doesn’t It creates trouble…. Mark N2OJD

Did you perform the PA alignment? The values stored for orig PA and exciter may be way out for the 900 PA. Just do a PA INIT, and try again. Tom n7oep WRBK584

Folks I had something odd here. I have three Quantars in service, all 100W, one UHF in 441 band, two 927 band. I had a PA fail on the 927 in Cedar Hill so for tight now I pulled the PA from the local

I have available free for pickup three vhf Micor base stations. One of them has a 136-150mHz PA deck, that was working when last in service about ten years ago. There have been various parts robbed,

Hi all, Has anyone got a picture of the heatsink that goes under the Rx radio in a TB7100? I've added some photos of how it looks on a TM81XX Thanks

Remember that radios of this vintage require an old, slow DOS computer, or the system won't talk properly.? I use a Compaq 386 "lunchbox" computer that is native DOS (and works just dandy on

I don't recall all the details, but the desktrac's were a pain in the a. You probably need the progamming manual.?? As I recall, there is a rotary switch that depending on which part of the desktrac

It is a programming cable to update the firmware thanks

All, Have a nice UHF MTR-2000 40w we are looking to use for 44 ham usage. Starting from a clean default profile, it programs up perfectly and will operate perfectly. But if powered down, TX audio &

Looking for a Secure Capable Station Control Board for a UHF 100w MSF 5000, had an SCR smoke. Was also dealing with some occasional noise on the TX. TLN 3043B0818K. Any options would be welcome, and

Hello All. I am having issues programming a VHF DeskTrac Repeater and wanted some insights I've built close to 8 Different Cables all listed as "DeskTrac"or"MaxTrac" and I have not been able to get it

I had a TKR 750 working on a RLC 3 Controller. I bought a New TKR D710 and hooked it up to the same cable and configured the D710 just about Identical to the TKR 750. If I let the Repeaters internal