开云体育

I cannot comment on the software but I bought one to program another bread of commercial radio and the cable seem to be first quality.? It loaded and worked the first time. Ralph ku4pt

I'm looking for a Low-Band (30-50 MHz range)? High-Power MICOR Station (with the PA that uses a pair of 8560A tubes) if anyone has a lead on one. Larry

Hello, Before I order a cable to program a Icom IC-121S I'd be interested in folks opinion of the quality of BLUEMAX49ers.com prog. cables.? I'd rather not mess with "Cheap" import cables. Most do

Hi, does anyone have any good resources? Other than echo Link to help me set levels for box on a repeat running echo Link? I do it by trial and error because I've never found a good resource to help

Try

Like

To me that looks like a 5-pin microphone connector, like used to be used on older CB radios. Chuck WB2EDV

Hi, I hope this isn't too far off topic, but there's lots of good GLB information on Repeater Builder, and I have discussed GLB synthesizers with other members of this group.... I found a GLB 414 two

Anyone happen to have an assembly sheet for a AirCell/Trilogy NMP01250 Heliax Connector? Don't need the spec sheet. Just need the info to prep the end of the heliax. Rob K7TGU

ARRGGHH *I hate HOW

(I hate out this particular forum doesn't let you edit a message) What I meant to say is all old DOS software relies on being in Real Mode, and doesn't know what Protected Mode is. It's all

I think the problem is that even if everything's mapped correctly, you're still using DOSBOX; hence, you're in Protected Mode, which all old Moto DOS RSS relies on. I seem to recall that new fork

I think that's it. Like I said elsewhere I went to do the PA output align but got sidetracked... But pretty sure that was the problem since four PAs did the same thing GeorgeC

used the service monitor output on 10 mhz for reference. With no reference the station will not transmit or receive, so had that part covered GeorgeC

Frank, Ron here from MCC.? The RC-100's RB timeout enable/disable (toggle code) is at 4151 Dxx code. Let me know if you need more info or help. 73, ron, n9ee MCC

Hi, Sorry for the late reply. I was still trying but I have officially given up on the ics. Did you have a northcomm? Thanks Robert yahoo.com@groups.io> wrote:

Please see: https://www.repeater-builder.com/motorola/spectra/spectra-index.html I'd guess that you'd want to look at any sort of Data PTT function the radio may have. Hopefully someone will chime

All, On batlabs's spectra page it mentions that there is an option on the analog spectra to do flat tx/rx audio which I need for some data purposes,? It also mentions that hte info is in the service

I've searched the existing topics without finding what I need. I have an RC-100 that's working well, but I'd like to disable the base station timeout. I have worked with the tones, but it's been a

Same cable as used on the Midland Base Tech II and III stations, if that helps. They are rebadged KG510s. Chris/AJM -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET Cal. Intertie (KB3PX)