开云体育

True, but I have had success at running them at 22 watts.? have a couple of them here that I use for backup replacement repeaters while doing repairs. The last time I used it was on a VHF ham

The r1225 is still not a 100% duty cycle machine. They have a week spot at full power? the solder melts on the final and causes a failure we have on in service but cut back to 20 watts. Not always

Not always true.? For example, the Motorola R1225 repeater appears to be a mobile, but the heat sink is much larger than on the regular M1225 mobile. Joe

Hi guys.? I have an issue with USB comms to an early model XPR8300 repeater.? ?It's has been extremely stubborn.? ?I've tried everything, different PC's, different cables, both CPS16, and CPS2,?

Yep bad cap. I have had that happen a couple times. Also the BPBR coupling loops for the VHF telewave cavities for 2M are a tad longer than those use in the commercial region. There was a write up

If it's the cavity on the antenna side, more than likely it took a lightening hit. Replace the capacitor and you should be fine. Just make sure you get the highest voltage one you can find. I would

Typically one gets a receiver with a tuned preselector front end, a decent IF response curve, and god squelch circuit action, as well as a transmitter that has much lower phase noise with a factory

Most mobile radios are seriously deficient in many aspects when put into repeater service. Purposeful repeater stations are generally designed to higher standards. Duty cycle of mobile transmitter 25%

Interesting comments Matt... company I work for is owned by three brothers who bought their Dad out 40 years ago... one is a neat freak and uses guides and routes every coax and wire all neat and

I would add that building a repeater for home made from a pair of mobiles is typically done with a "flat pack" duplexer (thinking UHF here) which are cheap and band reject only. These do not perform

To retort: Many, if not most, current "factory" repeaters today are nothing more than 2 mobiles in a box. So if the act of buying them pre-packaged in a metal wrapper makes it professional so be it.

Earlier in the game, the same basic guts were common to mobiles and base stations / repeaters. Obviously, the packaging of these differed. Mobiles were compacted for said environment with less

Professionalism. If you are building a repeater to put at your house, or what I would call a non-commercial site, 2 transceivers can be an option.? If you are planning on putting the repeater at a

It seems many individuals and groups when they want to put up a repeater opt to just buy a sometimes expensive box like a quantar, msf5000, msr2000, ge, kenwood, virtex, icom, etc and call it a day.

Since its now official that Hamvention is cancelled this year, I have to go online to start my hunt for a repeater. I'm looking for a VHF Motorola Quantar for a new repeater project. If anyone in the

Any time a cap jumps around it is bad and the green junk is a sure sign of water

I'm working on this VHF duplexer our club acquired from another Ham. He doesn't know any of the history before he received it, so I don't know if this was factory ordered for the 2 meter band or if it

Yeah, I forgot to mention that bit - the AEMC units can be a little pricey but you can sometimes find them on the secondary market for less. I paid WAY less for mine and it was almost new with the

Nice clamp meter apart of the price being around ?1200. I use mine more for nuisance RCD tripping very easy to clamp around the pair of main tails and measure the leakage of the whole installation I

Oh and it has 1ma resolution which is hand for low current devices... http://www.extech.com/products/380950