开云体育

I was talking to a GE service rep., and he also said that 2 are required because of the PLL only doing TX or RX at one time. I think so. Supposedly, the 2 people that are selling them got a skid load

Terry, I would mount your antennas per your note 2C. John Lloyd, K7JL ------------------- Terry Bartholomew NQ4Y wrote:

I apologize for this being a bit off-topic, however repeater builders should have a bunch of goodies laying around which would serve my purpose nicely. I'm putting together a six meter propagation

Near Albion PA 41-54-08 X 80-25-52 Elev 910 ft Dick WA3USH "It happens, just deal with it"

THE RANGER WONT MAKE A RPT UNLESS YOU USE TWO OF THEM. HOWEVER THEY ARE ONE OF THE BEST SIX METER RADIOS GOING. IF YOU HAVE A CHANCE TO GET THEM DO. ALSO ARE THEY AVAILABLE TO OTHER PEOPLE OR

Located about 60 miles south-west of Toronto, Ontario (EN93). Our club, The Kitchener-Waterloo ARC (http://www.kwarc.org) maintains a number of repeaters including 2m, 220, 440, and the soon to be

Oops, sorry, I posted to the wrong list!! Sorry guys. Joe (wa4nwo)

To answer Bob's question about getting a list of all the subscribers: YES! On your member center page ( go to <http://www.onelist.com/ and login, then click the "Member center" button) click on the

Hi Chris, and the Group, I am getting this group from down here in New Zealand, and if this group is anything to go by, it should be going into every country, thanks to Kevin for adding it to the

I understand this model converts very easily to a repeater. Has someone published modifications for use as a repeater? Nothing fancy, just a simple COR would do. 73's, Randy, WB0VHB

The Repeater-Builder List now has 211 members. This all has happened in just 14 days! Carry on........ Kevin Custer List Owner

I'm in Spanaway , WA... 470222N x 1222250W, Grid CN87TA. 73, Gary, W7NTF

Hello to all Can some one tell me what a motorola C74gsb-610_ _at That is the # that i can read Thanks chuckk

Hello to all Can some one tell me what a motorola C74gsb-610_ _at That is the # that i can read Thanks chuckk

Dean wrote: http://www.science-workshop.com/ Go here for a really neat analyzer that won't bust your budget. I have built two of them and they work ok. Kevin

Dean wrote: Their stuff is usually not worth a damn. IMHO of course. Kevin

Has anyone had any experience with the ramsey or the build your own spectrum analyzers kit's ? there really cheap? but will it work?

Hi people: Thanks for all the replies about the Mitreks and Master II's. While at the Hamilton, Ontario fleamarket, a friend found some GE Rangers on 6 meters. They come with the 990 control head,

thats for the tip. I emailed amtronix but they indicate they have too much of a back log and referred me to Communications Signaling. Mark

I would go to the local Two Way shop. Many times they have one ready to sell for a good price because of a recent upgrade. I have gotten several this way. Also try this