开云体育

"Kevin K. Custer W3KKC" wrote: Does anyone have a schematic for an Astron RS-12A? Kevin, I have a jpg image of the RS-12 but it is about 195K! If you wish I can send it to you if you are in a

Just sending this to get the RPITP Url from the bottome of the message lost all info pertaining to url's and e-mails netscape crashed and it deleted my book marks and all while i am here i got ?

JHowel@... wrote: What band please? kuggie

writes: Sorry, I realize now I forgot to mention that - 136-174. Thanks. Jeff

Yes, you can interchange them, but you can never use an EC element with a 2C. The temperature compensation for an EC *must* come from a 5C element. The 2C only compensates itself. Joe, KR3P Brent

Ge ICOMS Is it true that the UHf and VHF ICOMS can be interchanged with each other??? 2C PL19A129393G4 Rx @ 417.775Mhz EC PL19A129393G18 Tx @ 457.650Mhz looking to put these on VHF

Does anyone have a schematic for an Astron RS-12A? A person emailed me directly and ask for a copy which I could not help with. If you do, can you scan it and email it to me. Required size is

I was asked to post this again, so here goes.... Hello All, I recently received several requests from people on the list wanting to obtain the large heat shrink I use to seal the Comet and Diamond

Hi Joe,would sure appreciate the help if you could recall how to do the programming. Doug VE6ZH ----------

Michael Lussier wrote: If you are on 2 meters or lower, you can point three in the same direction and the fourth in another, but the elements cannot be at the same level (elevation). You will,

Anybody happen to have any spare channel elements for Mocom 70's? If so, please contact me privately with your asking price. Thanks. Jeff,

I am looking for some help with antenna questions for my GE MASTRII/RANGR Repeater What is the consensus on 4 bay dipole arrays for repeater antennas ? I have looked into the coverage maps with both

I am looking to buy or trade for a 220 MHz duplexer. Contact me direct please. Thanks -- Richard D. Reese WA8DBW Voice 330-335-0122 http://www.wa8dbw.ifip.com

I'm using a PSX-SE on UHF, so I must have programmed it for the ham band, but I don't recall how. I probably had to edit the hex data. If you can't find anyone else who can do it, I'll research it

Will do Ralph,have a friend in the mobile buiss.,he can do the vhf versions but not the uhf. Doug Ve6zh ---------- uhf's I like to do. some! GE

Doug, If you find out on the phoenix-S, let me know too. I've got a couple of uhf's I like to do. BTW Kevin, thanks for the heat shrink source. We will definitely get some! Tnx, Ralph WB4TUR

Kevin,i was able to read all messages today.Back to the question on the GE uhf Phoneix,anyone have info on reprogramming for the ham band?? Doug VE6ZH ----------

oh well i got all the pins out for the back of the radio and they have great rx in ther i use one for tx and one for Rx for a repeater they work great.....i can give u that and i am working on putting

looking for a schematic for these radio for the single channel and 2 channel .. Ge Century II UHF MOBILE Comb: M5A15 FCC TX data: KT-180-A FCC RX data: ER-116-A Brent DeSalvo

bill wrote: What controller do you have? What radio do you have available for the remote? What band(s) do you want to link to? Kevin