开云体育

Get the stripper tool. Use a drill and you're done in 30 secs Chris WB5ITT [email protected]> wrote:

The manual with schematics is on the Repeater Builder site now.

I use an IBM thinkpad model X20. it’s a P3 with a real serial port. ?I don’t use moslo or anything for maxtrac or gm300. These machines run XP and 2000 with no problems. ?I use separate

ICT (and others) are variable speed. I run Alpha (Cordex) multi unit supplies too. Multi-circuit input, HA/load sharing up to 4 units, mixed voltage as well. Matt AL0R

Very nice supplies, indeed Chuck, actually almost mind boggling to get all that power out of such a small area 1U rack. I was just concerned about the reliability of what is probably a very small

Hi all, Anyone want a project? I have a Mirage 3016B 2m 170W amp for parts/not working for sale as-is. It is in great cosmetic shape, but when powered up, the lights come on, but the amp

I have no issues with programming MaxTracs. I started out using a 2007 era laptop in FreeDos that has a serial port and programmed radios for years with that. I obtained the 486 laptop 2 years back

I suppose it's possible but after 10 years of hard use, they still seem pretty happy. Besides, if push comes to shove, replacements are under $30. I can line with

At 4/20/2025 11:24 AM, you wrote: I've been running 4 Meanwell switchers (12VDC @ 29 amps) in series for well over 10 years to provide 50 volts to my 6 & 2 meter solid state KW amps. They haven't

For our club site, I consolidated all the 12V loads onto a single power system, using ICT N+1 Power system.??? Same supplies as what Daniels/Codan/Zetron supplied with their units.?? Provides

The HamVOIP process will certainly program the radio without much drama. The DOSBox process does work on my Win 10 i7 laptop. Both options will work using an FTDI cable. Yes, the baud rate is a very

Rob, on the box the cuts are center conductor .79"? (20mm)? and the outer jacket is .63"? (16mm). I hope that helps. Chris N6ICW

I have a Duracomm DPS-75 Power Supply on my collecting dust. Got it for a good price after our club had an Astron fail on one of our repeaters. County Radio Shop loaned us a DuraComm DPS-55 (Amp) . We

Instead of swapping it out, add the various modes to your existing MTR2000:https://www.repeater-builder.com/products/stm32-dvm_MTR2k.html?Scott.?Sent from my Verizon, Samsung Galaxy smartphone

Jared Do you have just one Maxtrac that you want programmed??? or do you have a shelf, box, or storage room full of them ?? what band Maxtrac do you have? L/B, VHF, UHF, 800, 900? and what would you

The LDMOS community seems to have settled on Eltek Flatpack2 series either 48/2000 which does 53.5V at 37A continuous or the 48/3000 which does 53.5V at 55A continuous. Both of these show up on eBay

All good- but seems like it is over complicated when you can get a single 50 or 60amp supply to do the job probably for less money than 2, 3 or 4 smaller power supplies. 73, Marlo KA2IRQ

I've used DOSBOX on XP up to Win11 with good luck. You must remember to have ALL files in the same file folder (directory) and follow DOS naming protocols, including length of the filenames and legal

Changing out my 2 meter MTR2000 repeater on analog FM for a multi-mode repeater. Not sure what the market value is, so open to offers for the next few days. Email me direct at my call sign at gmail.

Thank you to Tim, Jeff and Mike for your Reply's. I have now found the problem to be a smal surface mount fuse neer the control head connector on the main board on the Filtred B+ line feeding the