开云体育

I was finally able to program the rangr with raw hex data. I used deltaprg and the nrhcpxp software to get the values I needed and where they needed to be. Of course, neither one of them were correct

Anyone got an RBI-1 for sale? I need to do something with these Kenwood mobiles laying around this place. Chris/KF6AJM (callsign at aol dot com) -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET

On other instrumentation -equipment I've encountered in 50 year of Field Engineering, a FAN fault and the fan is spinning, can mean the control circuitry has failed --and the fan can be in an always

Tom, I must disagree with you on one point: " *the frequency belongs to the person or group*."? Maybe you misstated, but no frequency belongs to any one person or group.? We may be coordinated on a

Sorry, I must have been asleep when I posted this. I'm Looking for a Quantar R2 RF Amp. Thanks, 73, Randy Fisher K9MMQ Roanoke,

The really bad part is it’s low band range 4 AND IS NOT equipped with the full filtering option.

Boy, that guys sure wants a lot for that station! Most people give them away any more...

So as of the repeater going on vacation in me wasn’t enough. it has developed a taste for a password that I did not set. yes it’s asking for a password to access the machine or to program the code

Gervais, Go to this eBay auction to view a picture: https://www.ebay.com/itm/146270585583 Click on the third picture down - it's a MICOR VHF PA in a station. The BNC connector on the left is the RF

The orientation maybe an issue. I mean it only goes in two ways but have to find the original file and me problem can’t remember which computer it’s on but I’ll let you guys know what happens

If I personally wanted to put up a "closed" repeater, for me and my ham friends & family, I would just pick a couple frequencies that wouldn't be bothering current infrastructure.? No standardized

Well, great answers but i dont understand everything ,,i am not a tech as you guys! If i understand ,on the Micor PA i could connect some wires (on the PA circuit) so at the ainstant 250 mw would be

Randy, Do you have more specifics such as model (Micor, MSR, MSF, Quantar, etc), or at least the drive level you require. I have a 100w Micor UHF amplifier here that is excess to my needs, as

At 1/5/2025 11:36 AM, you wrote: I will disagree with your opening statement. Repeaters are NOT open unless the trustee decides they are open. Yes. Unlike 146.52, a repeater pair is assigned to a

I will disagree with your opening statement. Repeaters are NOT open unless the trustee decides they are open. Unlike 146.52, a repeater pair is assigned to a particular person or group in a certain

Good Day, All. In the U.S., all repeaters are "supposedly" open. All owners of 47CFR97 controlled systems are "trustees" under the rules and regs of the CFR. As trustees, you are responsible for

I am not familiar with the details of that radio, but higher power broadcast transmitters and industrial.controls use an air flow detector to confirm enough air flow for cooling. Just knowing the fan

Karl, The information you provided to Gervais is NOT correct. On a MICOR VHF power amplifier - you have to switch the A- (A minus) during transmit.? This logic can be sourced from the PTT of the

Gervais, ? The Motorola PA B- has to be switched in order for the amplifier to work (unless you modify it like I do). ?If you do have a "hot" PA be sure to protect it with an isolator and cavity if

How much are you wanting for each of the CM300s?